marine hydraulic steering gear 1)Suitable for: Containers, tankers, ferries, General cargo ships, passage ships, Dredgers and any other vessels that need more steering torque. (2)Main Tech: Max working torque: 15 KN.M - 250 KN.M Max. mech. rudder angle: plus or minus 45 degree Time of rudder movement: is less than or equal to 28 S Rudder stock Diameter: 300mm - 900 mm Working pressure: 13 Mpa - 20 Mpa Design pressure: 16 Mpa - 24 Mpa (3)Scope of delivery: Marine steering gear with hydraulic cylinders Electro-Hydraulic power station with oil pumps Oil tanks Start motors On requests, the full range of parts will be delivered. (kn.m) Nominal Torque Turning Angle (o) (s) Turning time (Mpa) Max working oil pressure Gear pump/motor (mm) rudder tiller radius (Mm) Diameter of radius Type No Output (kw) 10 plus or minus 35 is less than or equal to 28/20 6.5 CBN-316 2 1.1 240 75-130 16 plus or minus 35 is less than or equal to 28/20 10.2 CBN-316 2 1.1 240 75-130 20 plus or minus 35 is less than or equal to 28/20 12 CBN-320 2 2.2 240 75-130 25 plus or minus 35 is less than or equal to 28/20 10.9 CBN-320 2 2.2 290 75-150 30 plus or minus 35 is less than or equal to 28/20 9.8 CBN-320 2 3 290 75-150 40 plus or minus 35 is less than or equal to 28/20 10.3 CBN-420 2 3 360 1160 50 plus or minus 35 is less than or equal to 28/20 12.5 CBN-420 2 4 480 170 63 plus or minus 35 is less than or equal to 28/20 8.4 CBN-420 2 4 480 175