If you understand the warmth of the earth, of course, understanding of the floor heating pipe is also more than adequate. The floor heating pipe is a pipe used as a low-temperature hot water circulating flow carrier in a low-temperature hot water floor radiant heating system. So, what are the common materials for heating pipes? How to do to leak water pipes? For the first time to contact with the heating pipe of the friends, it will inevitably be overwhelmed. Do not worry, if you have needs in this area, we might as well come with me together to find warm water to introduce the relevant knowledge.
Heating pipe common materials
Materials are PE-X (cross-linked polyethylene pipe), PE-RT (heat-resistant polyethylene pipe) and so on.
1. Cross-linked polyethylene tube PE-X
Dispersing unevenly, need regular cleaning, control is difficult.
2. Polybutene tube PB
The softest tube and the thinnest wall thickness. Safety, highest price, and less domestic applications.
3. Heat-resistant polyethylene tube PE-RT
The creep failure curve that meets the product standard is complicated to process and the quality is difficult to control.
Warm water pipe purchasing method
1. Look at the surface. Smooth surface, indicating the model, specifications, brand and other information.
2. With your hand. Feel delicate, smooth, moderate hardness.
3. Look at the wall thickness. Whether the wall thickness meets the requirements.
How to do water leakage to warm water pipes
How to do water leakage from floor heating pipe - leak detection of floor heating pipe
First of all, pressure test, 8-10 kg for half an hour, observe the pressure gauge changes. After determining the location of the leak, open the floor and perform maintenance.
How to do water leakage from floor heating pipe - Remedy for leakage of floor heating pipe
Close the water inlet and outlet valves. After the maintenance is finished, press the test again to ensure that no water leaks.
How to prevent leakage of floor heating pipe - how to avoid leakage of floor heating pipe
1, construction careful, not cross-operation.
2, three pressure test, the pressure 1.5 times, not less than 0.6Mpa. Pressure 1 hour, not more than 0.05 Mpa.
3, install the water filter, can filter some impurities, reduce cleaning frequency.
Editor's summary: The above is a brief introduction to the leak detection and remediation methods of the floor heating pipes. I hope to help friends who have this need! For more information, please continue to pay attention to our website, follow-up will show more exciting content. You can also purchase your favorite product on Qijia Mall!
Heating pipe
ZHEJIANG HESHUO TECHNOLOGY CO.,LTD , https://www.hosuocn.com