1. Re-adjust the guide pulley. When tightening the wire, the tension pulley should be used effectively, and improper tools cannot be used. The wire electrode can also cause broken wires due to damage.
2. Select the normal cutting material and cutting line during processing to minimize distortion.
3. Generally, the workpiece is attracted by a magnet when cutting is completed quickly to prevent the electrode wire from being broken.
4. Check whether the electrode wire is in the guide pulley and the wire rod, whether the wire electrode is arranged in an overlapping manner or not, check whether the rotation of the cartridge is flexible, and check whether the conductive block and the wire rod have been cut off.
DSPOF produce differnt of Fiber Optic Light,alos include the Sauna lighting kits.
The Fiber Optic Sauna Ceiling light are safe for use in wet and humid areas as no heat or electricity is present in the fibre optics or fittings, but the illuminator which contains the electricity, must be located outside the main sauna or steam room.
Sauna lighting is something of a specialist field. This is because the heat of the sauna will cause most traditional light sources to fail. To illuminate a sauna safely and effectively, one must either use a fibre-optic lighting system, or use specialist sauna LED's. Furthermore, getting the light levels and in turn the ambiance in the sauna right, is crucial to the enjoyment of the sauna itself.
Sauna Ceiling Light,Sauna Lighting Kits,Sauna Room Kit,Sauna Light Kit
Jiangxi Daishing POF Co.,Ltd , https://www.jxopticfibrelight.com