Latex paint is one of the wall decoration materials and is also the choice of most owners. It can create simple, generous and bright interior decoration effects. How can we brush and paint latex paint? Let's take a look at the steps of brushing latex paint along with Xiao Bian.
Brush latex paint step 1, equipment brush tool
Brushing latex paint requires the use of soft-bristled brushes, pens, sun lamps, sandpaper, roller brushes, spray guns, small buckets, rags, blowers, and spray guns.
Step 2 of latex paint, wall repair
Regardless of whether it is a rough wall or a wall that has already been putty, the wall must be repaired when the paint is applied, and the grass is required to be smooth and solid. For the wall surface, there are powdery, empty drums, sanding, shedding, etc. The surface phenomenon should be scraped with a matching putty in order to carry out the next construction.
Brush latex paint step 3, putty
Before the interior wall paints the latex paint, generally will want to scrape twice putty, it can make the wall surface even more. Putty powder and 801 + 809 glue stir, you can use as a putty paint.
Step 4 of brushing latex paint, wall polishing
Even after the putty is finished, there will be some unevenness on the wall surface. At this time, sandpaper can be manually polished to repair the uneven position. You can use the sun light to assist in checking the flatness.
Brush latex paint step 5, paint operation
a, brushing method
Drain brush is the most provincial paint application method in latex painting method, but it belongs to slow workmanship. When brushing, start with a little, and then follow the order from top to bottom, from left to right, so that it is not easy to miss the brush and avoid uneven effects. Do not paint too much sticky, otherwise it is easy to fall to the body or appear "washing tears" phenomenon.
b, stick brush
The stick brush is a cost-effective construction method, it is rolling operation, the construction is very convenient, but the effect of this construction is relatively common, many corner areas may not be able to brush to paint, there is a waste of paint. It is usually done by using a roller roller to coat twice. The interval between summers is more than 2 hours, and the interval is longer in winter.
c, spraying
The effect of spraying is good, not only natural, the construction speed is also fast, very time-saving, but it is easy to appear granular wall, it is not easy to repair. It is the use of spray guns to regularly move the spray, pay attention to the uniform color of the joint, uniform thickness, but also to prevent leakage spray, run-off phenomenon.
d, batch
The effect of the coating is best, but it is very costly, but the choice of the general coating on the line, that is, the use of ordinary latex paint can also be awarded good results.
Editor's Note: The above is the full analysis of the steps of the latex paint , I hope that the small series of sharing can give everyone a reference in the renovation of the wall, and better to do a good job wall paint. If you want to know about other decoration, you can pay attention to our website.
Steps for brushing latex paint
Pipe Fitting Cap,Stainless Steel Cap,Carbon Steel Cap
Cangzhou Youlong Pipe Fitting Manufacturing Co., LTD , https://www.ypco88.com