As people's awareness of floor heating increases, many home users will choose to install heating for home heating. The living room, dining room, bedroom, and study are all installed with floor heating. It is the whole family to spend the cold winter. So what kind of flooring material is good? The following Xiao Bian took a look with everyone.
What kind of flooring material is good for floor heating?
1, tiles
When choosing to warm floor materials, the preferred material is a tile.
A ceramic tile is a kind of building or decorative material that is made of refractory metal oxides and semi-metal oxides through the process of grinding, mixing, pressing, glazing, and sintering to form an acid-base resistant porcelain or stone. Always called tiles.
The hardness of the ceramic tile is better than other materials, and due to the reason of the material, its good heat dissipation can make the indoor temperature rise in a short time after the floor heating is turned on, and the temperature is generally 3-5°C higher than that of the wooden floor.
Because of the need for long-term heating, ceramic tiles with high hardness have a low moisture content and can remain stable after being heated. After prolonged use, there will be no problems such as mildew, insects, corrosion, deformation, etc., and there is no need to worry about moisture and heat. After the deformation, tilt and other ground problems, but also do not worry about heating tiles will emit harmful gases or radioactive substances, easy to clean and care and environmental health.
2, composite wood flooring
In addition to tiles, composite wood flooring is another popular material for laying floor heating.
Because the laminate flooring is more conformable and comfortable to the feet, the barefoot feels softer on the wooden floor. Insulation is much better than ceramic tile. When the same temperature is reached and the floor is turned off, the wooden floor can keep the house warm for a longer period of time.
Why choose composite wood flooring rather than solid wood flooring? The reason is that although solid wood flooring is more environmentally friendly, it is not suitable for floor heating. Because after a long time of use, solid wood flooring will have the phenomenon of deformation, open plastic, slits, etc. If the floor is warm, the chance of heat deformation will be even greater, and it may even be a single block tilt. Composite wood flooring performance is more stable than solid wood flooring, the probability of this phenomenon is relatively low.
3, marble
In all floor heating materials, marble is a relatively expensive one.
Marble is the metamorphic rock formed by the original rock in the crust through the high temperature and pressure in the earth's crust. It originally refers to the white, black-patterned limestone produced in Dali, Yunnan Province. The profile can form a natural landscape painting of ink and wash. Later, there are all kinds of color patterns. The limestone used for building decoration materials is collectively referred to as "marble."
If you are using electric floor heating, consider using marble as a floor material. The thermal conductivity of marble is better, and the insulation performance is slightly better than ceramic tiles. Natural marble has a naturally-formed texture and is a unique home decor that looks very good. At the same time, the heat resistance, water resistance and abrasion resistance of marble are superior to other ground materials, and there is no need to worry about various ground problems caused by moisture. If it is not intentional damage to the ground, there will be no scratches on the marble surface.
Ten precautions for warm installation
1. Be sure to find a construction team with professional knowledge of floor heating. "Three-point floor, seven-point installation", the effect of the amateur decoration team is self-evident
2. The sealing of the floor heating system must be checked before paving.
3, the ground must be dry (can be judged by experimental phenomena), the concrete floor moisture content should be less than 1.5%; indoor humidity should not be too large, regardless of whether there is geothermal heating, the ambient humidity before and after installation is better than 60 degrees.
4, nailing is strictly prohibited on the ground during construction. After construction, the ground is also prohibited from nailing to prevent damage to the heating coil.
5, before laying laminate flooring should be laid EPE composite film (EPE composite film must be marked with floor heating special words), isolated moisture, so that moisture from the surrounding skirting board to release.
6, should not lay keel. The small thermal conductivity of air will affect the cooling effect and may damage the pipe.
7. When the floor is laid, special glue must be used for floor heating to increase the time and effect of use. Moreover, the glue basically does not have to worry about the emission of harmful gases.
8. Leave expansion joints between the floor and the wall and use skirting boards that are thicker than normal floorboards.
9, paving the ground and installing the skirting board should be divided into two constructions. 48 hours after laying the floor, the glue is completely dry, and the skirting board is removed after removing the fastener.
10, the floor can be heated after installing 24 hours.
Summary: The above is the content of the method that the Xiaobian introduced to the microphone when there is no sound, and hopefully it can help you effectively. For more information, please pay attention to this website.
What to use to warm the floor to warm the floor to warm the floor to warm the floor to warm the floor cleaning
Wooden Gate Hinges,Best Hinges For Heavy Wood Gate,5 Bar Gate Hinges,Heavy Duty Wood Gate Hinges
Jiaxing Gates Hardware Products Co.,Ltd , https://www.jxgateshardware.com