How to look for paint and paint distributors to develop business opportunities?

As the real estate market is booming, the share of the building materials market is constantly increasing. However, why is the sales volume of raw materials not facing rising raw materials, consumers are increasingly critical and other pressure, the small and medium paint distributors in the end go, what is The development path of small and medium-sized dealers When the author chats with the paint distributor, he will hear some dealers complain that: This year, the paint is too difficult to sell, the industry profits are getting lower and lower, and the brand is too difficult to do. The reporter visited many paint markets across the country and found many successful cases: a second- and third-tier brand will be mainstreamed by its dealers in a certain market; a distributor who has only two or three years in the paint industry can do tens of millions Performance and other enviable cases. Through the understanding and analysis of these cases, some experiences were summed up.

Careful choice of brand first-line brand to the dealer's choice of opportunities without the ever-increasing competition in the market, in the paint market, a large number of paint brands, but really called the influential brand is still relatively small. How to find a brand that meets their needs, has a large room for growth, and has enough stamina to be among many paint brands is something that every dealer needs to think about. In the past few years, most dealers were rushing to cooperate with big brands with the mentality of “backing on the trees and enjoying the coolness”. However, in recent years, with the rapid development of the coatings industry, the competition in the coatings industry has become increasingly fierce. The popularity of first-tier brands and the market coverage rate are increasing. Many paint shops in the same market are distributing the same product, Nippon, Dulux Marketing stores are adjacent to each other.

Paint coating distributors: Where are the opportunities for development?

For large distributors, they need a smooth channel for first-line brands to expand sales to get their year-end rebate. For ordinary dealers, the purpose of choosing a first-line brand is to use the brand's market popularity to achieve certain goals. Its own development. However, the threshold of first-line paint brands is very high. They will only cooperate with several large agents in one area, and then they will develop second-tier and third-tier distributors. Caused the ordinary dealers can not have a direct line of dialogue with the paint companies of the first-line brand, if encountered in the sales bottlenecks, will often be eliminated by its agents, dealers in a weak passive position, without the right to speak.

The second and third tier brands should not have the same vision. Compared with the first-line brands, the second and third tier brands do not have high brand awareness. Consumers are not very supportive, and corporate advertising and other aspects of support are not as good as first-line brands. Paint distributors are concerned about the difficulty of doing these products successfully. They always wondered if there are still some vacuum belts that they did not discover. Today is a Guangdong, and tomorrow is a Shanghai, so it is difficult to brand awareness in a regional market.

What is the opportunity? Although there are no first-rate brands in the promotion of means and channels, the gap between product features, quality, and first-line brands is not large. In some market segments, there are some second and third-tier brands. Than the first-line brand also has advantages. The second and third tier brands usually do a better job in terms of flexibility in sales policies and protection of dealers. They are in a big city such as the provincial capital, a decoration material city, a point or a district, and a point sales. The three-tiered cities can be distributed by the second-tier cities with their general agents and an agent according to the company’s strategy. Many companies have now managed to sink their channels into the county-level cities and set up an exclusive agent for the county. To ensure the interests of agents and distributors.

Therefore, for general dealers, how to choose a second- and third-tier brand that is suitable for self-development and local market operation is particularly important as a long-term strategic partner for common development.

Doing a good job of positioning and finding cooperation between brands and companies is often referred to as the relationship between “fish and water” by many people. Both manufacturers and merchants hope to achieve a win-win relationship, but in fact, companies and distributors have their own positions. It is contradictory in many ways.

In the early days of cooperation, companies often wanted to find powerful “big fish”, relying on merchants to quickly open up the market in the local network of personal connections and influence; and businesses are hoping to rely on “big tree” for development and growth. In fact, but after a period of cooperation, manufacturers found that the choice of dealers is not the bigger the better, but to adapt to corporate development strategy and agree with the company's development model and corporate culture is the best. When choosing a distributor, manufacturers should not only assess the strength, but also assess their comprehensive indicators such as goodwill, word-of-mouth, terminal network and marketing awareness, and more importantly, see if the distributor has a strong willingness to cooperate. After many years of market operation, the second and third-line brand companies have gradually established a set of own rules for how to select dealers. The business operations can achieve good results as long as they are used flexibly according to the terms of investment promotion.

However, dealers tend to be passive when they cooperate with companies. They do not have a clear idea and do not know what they want to do. Which brand is more conducive to their own development. What kind of position should the dealer make? The second- and third-tier brands with better brands cooperate with each other for a long time, or follow the big brands every day for a day. When the author visited the market, he found that dealers with relatively large business volumes usually had clear ideas and had their own advantages, disadvantages, and future development goals. It is very clear and clear. In this way, it is also very well organized to do things. They know what should be done actively, which should not be done or should be done by manufacturers. And more dealers are paying more attention to the immediate interests. Which corporate policy is good and the profit margin is so large which company goes with it? Today, this company will do this business. The company will change to that company tomorrow. Anyway, just make money. Everything can be done, no principle, no plan, everything is aimed at making money. This practice may temporarily gain some petty profits, but it also loses brand loyalty and credibility. In the future, it will be even more difficult to have the opportunity to cooperate with some outstanding brands. The development of dealers is likely to be a vicious circle.

In fact, each distributor has its own advantages in resources. The development of enterprises needs a clear market position, and the development of dealers is the same. Dealers may wish to list all your strengths, weaknesses, and social relationships, find the most advantageous and reliable resources for your reference, clarify your direction, and then look for a suitable brand to negotiate and cooperate. Of course, in the process of selecting and cooperating with companies, it is also necessary to carefully consider whether the overall strategic direction of the company is the same as your own set goals. For example, if you are rich in resources in the high-end furniture paint market, then you choose a company to do high-end furniture paint-based business cooperation, we all work together to do a good job of all services and common development.

Actually, the distributor selection factory is like a girl selection house, and finding a suitable one is more important than finding a good one.

We are a professional manufacture in producing Carbdie Taps. We offer a complete range of taps in carbide, CPM and HSS-E.

 we provied regular stock, and we also provide customization for your designs and logo. It is important to choose a professinonal manufacture to work with you, in order to communicate every details in the design. Our reputation has been built on quality, design and service – all at a competitive price. No matter you are a agent buyer or a factory source for self-use, we will be your most trusted partner.




Customized Carbide Taps are  tools for processing internal thread. According to the shape, it can be divided into a spiral tap and a straight blade tap. According to the use environment, it can be divided into a Hand Tap and a machine tap. According to the specifications, it can be divided into metric, American and British taps. Taps are the primary tool for manufacturing operators to machine threads.



We can customize products according to customers' needs.

 


PRODUCT DETAIL:

Customize Carbide Taps










PRODUCTING PROGRESS:

4product detail-fanyi

PAYMENT AND DELIVERY:

banggong huang jing

PRODUCT EQUIPMENT :

+banggong huang jing

ABOUT US :

     We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc., 


     We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.


    Our best selling of cutting tools include PCD Inserts, PCD End Mill , PCD Ball Nose Mill, PCD Reamer , Carbide Taps , Carbide End Mill , Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.

banggong huang jing

quanlity control:


We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.

great service

Thread Milling Cutters

Thread Milling Cutters,UNF Thread Milling Cutters,UNF Thread Milling Cutters,NPT Thread Milling Cutters

OPT Cutting Tools Co., Ltd. , http://www.optdiamondtools.com

Posted on