It is understood that chrome plating refers to chrome plating, and there are two kinds of chrome plating, one is decorative chrome and the other is hard chrome. Hard chrome plating is a better way to increase the surface hardness, but it has many advantages and disadvantages, so it is not used in many cases.
advantage:
First, the surface finish is good.
Second, it will not rust, there will be no rust spots.
Third, the original parts are less deformed during the plating process.
Fourth, if the size of the hardware parts is not in place, you can achieve the size by adding a few chrome (this is an advantage, but also a disadvantage, so the chrome-plated parts must be reserved).
Fifth, the surface is more beautiful.
Disadvantages:
First, the price is high, the cost of not only plating is high, and it needs to be processed after plating.
Second, it is not suitable for parts with complicated surfaces.
Third, the thickness is too thin, generally only about 0.05-0.15mm.
Fourth, the surface finish of the parts is relatively high.
Concerned about surprises
Tag: Weibo Electroplating chrome Advantages and disadvantages Surface finish Tencent
Previous: How to solve the abnormal noise of motor bearing Next: Electric valve selection skill
High Jetness Injection Black Masterbatch are mainly used for plastic injection, such as PE, PP, ABS, PS so on. This Black Masterbatch has high pigmentation and shiny finish, it could effectively improve the end-products surface shining. The carbon black content is from 40% 55%. High Jetness Injection Balck Masterbatch have shiny pellets surface finishes, the pellets are 2.0mm-4.0mm slice un-regular.
High Jetness Injection Black Masterbatch
Engineering Plastics Masterbatch,High Jetness Injection Black Masterbatch,Injection Jet Black Masterbatch,High Jetness Black Masterbatch
Anda Masterbatch( Group) Co., Limited , http://www.polymer-masterbatch.com