Failure to disassemble and inspect IKO linear bearings

What if the IKO linear bearing fails during use? Demolition inspection is certainly a good idea, but this method is time-consuming, below, Star Scientific hardware network Xiaobian to bring you a small way if you can not identify or predict operation by removing the check in the IKO bearing failure.

First, through the special person or listener, listening to the sound bar for bearing sound recognition

It takes a lot of experience to identify by sound. Must be fully trained to recognize IKO bearing sounds and non-bearing sounds. To this end, the work should be carried out by a dedicated person. The sound of the linear bearing can be clearly heard by attaching a listener or a listening stick to the housing.

Second, through the status of IKO bearing lubricant identification

First, the lubricant is sampled and analyzed, and it is judged whether or not the degree of contamination is mixed with foreign matter or metal powder. This method is especially effective for bearings or large bearings that cannot be viewed close together.

Third, through the working temperature of IKO bearing identification

This method is a comparative identification method and is limited to occasions where the operating state does not change much. For this purpose, continuous recording of the temperature must be carried out. In the event of a fault, not only does the temperature rise, but irregular changes occur.

Global hardware network

Concerned about surprises

Tags: IKO large bearing microblogging listener disassembly

Previous: Six types of power tools Next: Springs widely used spring machine came into being

Double jackets fire hose.

Double jackets, meeting higher pressure, abrasion high resistance.

PRESSURE REQUIRED:

D.

(inch/mm)

Working Pressure

(Bar   /  Psi)

Burst Pressure

(Bar /Psi)

1-1/4``

32

8 upto25

120 upto365

24 upto 75

350 upto1090

1-1/2``

38

8 upto25

120 upto365

24 upto 75

350 upto1090

1-3/4``

45

8 upto25

120 upto365

24 upto 75

350 upto1090

2``

52

8 upto25

120 upto365

24 upto 75

350 upto1090

2-1/2``

64

8 upto25

120 upto365

24 upto 75

350 upto1090

2-3/4`

70

8 upto25

120 upto365

24 upto 75

350 upto1090

3``

75

8 upto25

120 upto365

24 upto 75

350 upto1090

4``

102

8 upto16

120 upto235

24 upto 48

350 upto 700

5``

127

8 upto16

120 upto190

24 upto 39

350 upto 570

6``

152

8 upto16

120 upto190

24 upto 39

350 upto 570

 

Double Jacket Fire Hose

Double Jacket Fire Hose,Double Jacket Fire Fighting Hose,Yellow Fire Hose,Double Jackets Rubber Fire Hose

NANTONG SENTIAN FIRE-FIGHTING EQUIPMENT CO.,LTD. , http://www.firehose.cn

Posted on