The so-called stone seamless refurbishment process is to fill the gap between the adjacent slabs with the special caulking agent similar in color and slate, and then grind and polish them with professional tools and techniques. After being processed in this way, the slate will present a large piece of stone that is not divided as a whole.
Stone seamless refurbishment process generally has the following steps:
1. Clean the original filler between the stone gaps first, then use the special stone slitting machine to re-align the slits in the original stone installation to minimize the gap difference between the stones, and then use the stone close to the minimum. The color of the marble glue fills it. (Note: If you have done the middle seam before, you don't need to re-seam).
2. Use marble glue close to the color of the stone itself and perfectly color the marble glue, so that it is close to the original stone color to improve the overall sense and achieve the most ideal visual effect.
3, the adjusted marble glue is filled, because the marble glue will completely shrink after a certain degree of shrinkage, so the marble glue should be slightly higher than the stone level, so that it will not be filled multiple times.
4. Grinding and polishing the filler and grinding the filler to make it a horizontal plane, increase the overall sense of the stone, and solve the problem of high and low gaps between the gaps to prevent the gap from returning to black again. The use of a granite refurbished machine with a special cut-out abrasive pad to carefully polish the cut-out position makes it a flat whole with the stone.
5, grinding and polishing: the use of a dedicated granite polishing machine, from 50-3000 stone water grinding tablets from coarse to fine grinding of the stone, resulting in a smooth and new ground.
6. Crystallization treatment: the stone crystal powder and the crystallizing agent are matched with the crystal surface grinding machine to polish, and under the heavy pressure of grinding, the physical and chemical reaction of the stone and the crystal powder under high temperature is formed to form a dense and hard crystalline protective layer. . After crystallization, it can enhance color and brightness, and it can also achieve anti-slip, waterproof and oil-proof effects.
After the above process, the gap will have a good brightness, and the color of the stone is very close, the overall feeling is very strong, and, because of the stain resistance, water resistance and oxidation resistance of the marble glue, no black seam will be produced.
Goods Name:Wood Grain Series Laminate Flooring
HS : 4411141900
Density : 780-800kg/m3,800-830kg/m3;830-860kg/m3
Size :1220*199*8.3mm,1215x198x8.3mm
Surface : small emboss / middle emboss / crystal /feather/glossy/wood grain and so on
wear layer grade : AC1-AC4
Fob qingdao port or CFR,CIF
Wood Grain Series Laminate Flooring
Wood Grain Series Laminate Flooring,Waterproof Wood Grain Laminate Flooring,Cheap Wood Grain Laminate Flooring
Jining Sensen Wood Industry Co.,Ltd , http://www.sensenflooring.com