Myth 1: Pursuit of panels
The thickness of the three-layer solid wood composite floor is 2-4mm, and the thickness of the multi-layer solid wood composite floor is 0.3-2.0mm. Therefore, it is best to choose the appropriate panel thickness, and the panel thickness should not be excessively pursued.
Myth 2: Seller and paver
The seller and the paving party are not the same unit. When there is a problem with the floor, the two sides push each other, causing the consumers to suffer misery and regret. Therefore, it is best for both the seller and the shop to be one.
Myth 3: Excessively picky color difference
The panel of the parquet is natural wood. The trees have different color depending on the location of the plant, the different sunlight, the temperature and humidity. In addition, the plates cut out by the same wood saw, due to the different positions of the saw, will also result in different shades of color and different wood textures. Usually, the color of the sapwood is light and the color of the heartwood is deep. Therefore, there is an objective phenomenon of unevenness and unevenness of the pattern on the solid wood composite floor. This is a natural phenomenon. Therefore, when selecting a solid wood composite floor, as long as there is no obvious color difference, it is not necessary to excessively demand the same color.
Misunderstanding 4: keel laying method
(commonly known as the large core board)
In order to excessively pursue the sense of foot, some consumers add blockboard on the keel. In fact, the quality of the blockboard varies greatly. The quality of the blockboard affects the quality of the paving of the parquet. Therefore, if it is to be paved Blockboard, you must buy a well-known brand of large enterprise products, it is best to use multi-layer plywood instead of blockboard, it is recommended not to lay blockboard as much as possible.
Myth 5: Pursuing precious species
There are dozens of kinds of solid wood composite floor boards sold in the market, which are dazzling. The price, performance and material of different tree species are different. It is not the better the performance of the more precious wood species. Consumers should decorate the room according to their own living environment. Purchases such as network, personal preferences and economic strength.
Myth 6: Do not re-lay
There are many methods for laying solid wood composite flooring, such as direct paste method, keel laying method, suspension laying method, etc. Regardless of the laying method, it is necessary to choose a good construction team. Insist on the implementation of six non-shops:
(1) The wall is wet, leaking, the ground is not dry, not flat, not paved;
(2) Mixed construction, not laid;
(3) use inferior materials, not paved;
(4) The construction period is too fast to implement the process and not to be laid;
(5) found that the product has quality problems, not paved;
(6) It is required to be absolutely flat without color difference.
Myth 7: Do not pay attention to maintenance
Mainly because consumers use improper maintenance during use, such as water dipping floors, heating pipes leaking hot water on the floor, and long-term use after floor covering.
Myth 8: No solid wood flooring is good
Misunderstanding that the parquet is a composite floor,
In fact, the solid wood composite floor structure is reasonable, with the advantages of solid wood flooring, while the stability and resistance to geothermal performance are stronger.
Myth 9: High formaldehyde content
In fact, the formaldehyde emission of the solid wood composite floor can be used safely as long as it meets the national standards, and will not cause harm to the human body.
Walk Behind Saw Blade,Concrete Diamond Cutting Blade,Dry Cut Blade
Diamond Saw Blades Co., Ltd. , http://www.nssawblade.com