During the peak season of decoration, all major merchants have promoted and promoted a double-pronged approach, adding a firewood to the decoration market that has just begun to heat up. The average household decoration period is 5 to 10 years, so the quality of building materials is particularly important. The floor is the most wearable material in the home. When choosing solid wood flooring, the wood type, size and moisture content are the decisive factors for the quality of the floor. The author interviewed through the market to summarize the key points of selecting solid wood flooring. share together.
Longer substrate with longer growth cycle
There are many kinds of trees that can be used for solid wood flooring. The precious ones are rosewood and teak; the general ones are maple, eucalyptus, ash, and gamut; the cheap ones are fir and pine, and the price difference is very large. When purchasing solid wood flooring, try to select the tree species with slower growth rate. This kind of wood has strong stability and is more durable, which can avoid scooping, twisting, bending, cracking, arching, ringing, etc. during long-term use of wood flooring. . In addition, when buying solid wood flooring, it is necessary to carefully check whether the floor has any wood defects such as insect eyes, cracking, decay, and dead knots. For small joints, the color difference can not be too demanding, this is the natural property of wood. As for the natural texture of wood, most of them are string cut surfaces (along the main axis of the trunk or the direction of the wood texture), and a small part is the diameter cut surface (along the long axis of the trunk), which can be purchased according to personal preference.
The floor is not as long as possible
At present, the solid wood flooring supplied on the market is long and wide, such as 900mm×90mm×18mm. In fact, the wooden floor should be short and not too long. It should be narrow and not wide. The floor should be less than 600mm × 75mm × 18mm. The smaller the size, the stronger the resistance to deformation. If it is used for floor heating floor, it should be thin and not thick. Generally, the thickness is 8~12mm. In addition, the workmanship of the floor should not be underestimated. It is recommended that consumers use 10 pieces of floor to assemble on the flat floor. Hand touch and see if the processing quality is accurate, the finish is smooth, smooth, squat, groove matching, installation gap, anti-deformation groove, etc. Whether the assembly is seamless.
Water content test needs to be compared
When choosing solid wood flooring, the moisture content is very important, and the moisture content of the purchased floor should be consistent with the local equilibrium moisture content. When the moisture content of the floor material is higher than the equilibrium moisture content of the environment, the floor material will be wetted and contracted, and vice versa. Therefore, different areas, different uses, the requirements for the moisture content of the floor material are also different. Buying the floor must determine the moisture content of the floor. If the moisture meter is not available in the store, consumers are advised not to buy it easily. The method for determining the equilibrium moisture content is very simple. Firstly, the moisture content of the purchased varieties is measured in the exhibition hall, and then the moisture content of the wood flooring of the purchased varieties is checked out of the box. If the moisture content of the two products is only +1% to 2%, it is a qualified product.
Paint quality butts are easy to know
Whether it is lacquer or roller lacquered floor, it is commonly known as lacquered board; when choosing bright or matt lacquered floor, it should be considered whether the paint on the surface of the lacquered board is uniform, full, smooth and leak-free, blistering, perforation, among which The proposed wear resistance is recommended. UV light-curing coatings are recommended. The market distributors refer to UV paint boards, and their wear resistance and burn resistance are superior to other finishing processes. When testing whether the floor is wear-resistant and resistant to hot, the sample can be burned with a cigarette butt for 20 seconds. If no trace is left, the quality is good.
Conventional Rubber Accelerator
Conventional Rubber Accelerator,Rubber Accelerator,Rubber Curing
Ningbo Actmix Rubber Chemicals Co.,Ltd. (Ningbo Actmix Polymer Co.,Ltd.) , http://www.actmix-chemicals.com