ã€China Aluminum Industry】 Die Casting Finishing includes machining and surface treatment. Machining includes drilling, tapping, and milling. Surface treatment includes electroplating, passivation, anodization, electrophoresis, dusting, and spray painting. Wait. The choice of cutting fluid is related to the quality of the die-cast aluminum alloy parts. The problems that occur during the use of the cutting fluid are one of the major causes of the work waste. Die Casting Finishing Fluid QA: What are the major problems encountered in selecting or using cutting fluid in the workshop? 1. It is difficult to find a cutting fluid suitable for various aluminum alloy die casting process requirements; 2. Processing ADC12 isotherm such as corrosion, mold problems easily; 3. Aluminum alloy die castings with high finish requirements are prone to broken knife and tap phenomenon; 4 cutting fluid life and short cycle, easy to smell, affect the operating environment; 5. The precision machining workshop in the die-casting industry has a large amount of oil and cannot reduce the overall cost. In the face of the above problems, it is recommended to use environmental protection counter pressure cutting SF18/BF811. The refined mineral oil and synthetic ester formula system has excellent extreme pressure properties and can meet the requirements of various materials and processing procedures. It can completely replace oil-based cutting oil products. Cutting fluid The excellent anti-oxidation, anti-rust and anti-foam properties make the environmental pressure-compressing cutting fluid SF18/BF811 meet the requirements of priority for the choice of die casting machining fluid. â–ª The unique corrosion inhibitors for non-ferrous metals such as aluminum alloys and copper alloys will not cause problems such as corrosion discoloration and moulding of die-cast aluminum alloys and formed aluminum alloy rods and plates. â–ª The rust inhibitor content is balanced, the pH is stable, and provides rust protection between processes 7 to 15 days. â–ª Micro-emulsion unique anti-low foaming formula system, with good anti-foaming property, is very suitable for non-woven fabrics with supercharging device and high pressure oil pump up to 7.5 Pa. There is no foam overflow phenomenon. The environmental protection counter pressure cutting fluid SF18/BF811 does not contain chlorine, nitrite, phenol, silicon additives and heavy metal substances, the product fully complies with EU ROHS environmental protection standards; water-based environmental protection formula, PH value is low, does not hurt the hand, does not irritate the skin Low volatility, no chemical substances, no irritating effects on human breath and oral cavity, providing workers with a good working environment. The environmental protection counter pressure cutting fluid SF18/BF811 formula system has a high oil content and can be diluted 1:10 to 25 times. It can replace low-viscosity oil-based cutting oil or kerosene processing, thereby reducing the cost of cutting fluids for corporate customers!