RF Signal Detector Superior Sensitivity Anti Eavesdropping Device Full-Range Phone GSM GPS WiFi Bug Detector

This device is a VERSATILE RF signal detector which can detect most of GSM phone, smartphone, WiFi, wireless bug (hidden microphone), wireless analog and digital cameras and other wireless device during 50 MHz ~ 6.0 GHz.
 
It applies with fuzzy scanning technology to detect  peeping cameras,bug,cellphones and other radio frequency devices.This device  surely avoids being peeped or tapped to protect privacy or  protect  information being disclosed secretly.
 
This device has a new digital amplifer to heighten the indication for the digital signals of  Bluetooth,WLAN, WiFi, cellphone and digital Spread Spectrum  wireless products,etc.
 
This device has 3 LEDs indicating the detected signal strength.When detecting cellular phone or peeping camera, the LED will light from Level 1 to Level 2 to Level 3,and the beeping sound will change from Slow to Rapid indicating the strength of detected signal.
 
Wired camera detection
1.There is a Wire detection switch on the upper side, press down the red button, it will active the ultra-bright LEDs for scanning suspected areas.Press the switch again,the red light will put out.
2.When you find a suspected reflection, shake your detection light right-and-left slightly.If the location of the reflection as you shift,it  not a camera.
3.If the location of the reflection does not shift,then you might have discovered the lens of a hidden camera.
 
Analog/Digital Select  Switch
The signal of wireless camera, hidden microphone and walk talki are analog signal. The signal of Bluetooth, WLAN, Wi-Fi, cellphone and digital spread spectrum products are digital signal.
Usually, set the A-D switch to A. When to detect analog signals,the LED of the detector will light up without blinking and the buzzer will go off continuously.
When to detect digital signals, the LED of detector will be blinking and the buzzer will go off dis-continuously and small sound. Set the A-D switch to D, it will have stronger indication for the digital signals of Bluetooth,WLAN,cellphone  and digital spread spectrum wireless products,etc.
 
SILENT DETECTION
Earphone output: User can detect by earphone hearing without others' awareness.
 
SENSITIVITY TUNER
1. Eliminate the environment interference to set the detection threshold.
2. Adjust to shorten detecting distance for locating and finding signal source.
 
DISCOVER GSM / 3G BUG & SPY CAMERA
This device can detect and locate GSM / 3G bug (hidden microphone) and 3G spy camera which are applied GSM / 3G technology to be remote controlled by cellphone from anywhere.
 
STANDBY / IDLE PHONE REGISTRATION DETECTION
 
Specifications: 
 
Features:
1.Set the Wired switch on, it will activate the ultra-bright LEDs for scanning suspected areas.
2.Catching all the Peeping camera and Concealed microphone.
3.Hunting all the Cell phone, Wireless phone.
4.3 LEDs indication: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong).
5.Dual strength indication: Audible / LED alarm.
6.Sensitivity tuner for Distance adjustment.
7.Switchable Sound / Vibration detection.
8.With earphone to detect without other's notice.
9.With analog and digital signal detection switch.
Contact : lisa 
Mobile : +86 18776131889 This device is a VERSATILE RF signal detector which can detect most of GSM phone, smartphone, WiFi, wireless bug (hidden microphone), wireless analog and digital cameras and other wireless device during 50 MHz ~ 6.0 GHz.
 
It applies with fuzzy scanning technology to detect  peeping cameras,bug,cellphones and other radio frequency devices.This device  surely avoids being peeped or tapped to protect privacy or  protect  information being disclosed secretly.
 
This device has a new digital amplifer to heighten the indication for the digital signals of  Bluetooth,WLAN, WiFi, cellphone and digital Spread Spectrum  wireless products,etc.
 
This device has 3 LEDs indicating the detected signal strength.When detecting cellular phone or peeping camera, the LED will light from Level 1 to Level 2 to Level 3,and the beeping sound will change from Slow to Rapid indicating the strength of detected signal.
 
Wired camera detection
1.There is a Wire detection switch on the upper side, press down the red button, it will active the ultra-bright LEDs for scanning suspected areas.Press the switch again,the red light will put out.
2.When you find a suspected reflection, shake your detection light right-and-left slightly.If the location of the reflection as you shift,it  not a camera.
3.If the location of the reflection does not shift,then you might have discovered the lens of a hidden camera.
 
Analog/Digital Select  Switch
The signal of wireless camera, hidden microphone and walk talki are analog signal. The signal of Bluetooth, WLAN, Wi-Fi, cellphone and digital spread spectrum products are digital signal.
Usually, set the A-D switch to A. When to detect analog signals,the LED of the detector will light up without blinking and the buzzer will go off continuously.
When to detect digital signals, the LED of detector will be blinking and the buzzer will go off dis-continuously and small sound. Set the A-D switch to D, it will have stronger indication for the digital signals of Bluetooth,WLAN,cellphone  and digital spread spectrum wireless products,etc.
 
SILENT DETECTION
Earphone output: User can detect by earphone hearing without others' awareness.
 
SENSITIVITY TUNER
1. Eliminate the environment interference to set the detection threshold.
2. Adjust to shorten detecting distance for locating and finding signal source.
 
DISCOVER GSM / 3G BUG & SPY CAMERA
This device can detect and locate GSM / 3G bug (hidden microphone) and 3G spy camera which are applied GSM / 3G technology to be remote controlled by cellphone from anywhere.
 
STANDBY / IDLE PHONE REGISTRATION DETECTION
 
Specifications: 
 
Features:
1.Set the Wired switch on, it will activate the ultra-bright LEDs for scanning suspected areas.
2.Catching all the Peeping camera and Concealed microphone.
3.Hunting all the Cell phone, Wireless phone.
4.3 LEDs indication: Level 1 (Weak), Level 2 (Medium), Level 3 (Strong).
5.Dual strength indication: Audible / LED alarm.
6.Sensitivity tuner for Distance adjustment.
7.Switchable Sound / Vibration detection.
8.With earphone to detect without other's notice.
9.With analog and digital signal detection switch.
Contact : lisa 
Mobile : +86 18776131889

Stainless Steel Cnc Part

Precision CNC machined stainless steel parts are becoming a choice for many industries due to its desirable physical properties! Stainless Steel is one of the most popular industrial alloys for many CNC machining projects, due to its excellent physical properties. The below benefits have made Stainless Steel parts and products a viable choice for many industries and applications, though they are particularly favored in the medical, automotive, aerospace, healthcare and consumer electronics spheres. While the best and fastest way to make Stainless Steel parts is CNC machining especially CNC milling with stainless steel reach far and wide.

Stainless Steel Cnc Part,Stainless Steel Machine Parts,Stainless Steel Precise Part,Stainless Steel Cnc Part For Sale

Taizhou Shuwen Import and Export Co., Ltd , https://www.shuwengroup.com