Cylindrical inner bore inlet bearing device

Source: China Bearing Network Time: 2013-05-30

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

When the bearing inner ring and the shaft are tightly cooperated, and the outer ring bearing housing hole is a loosely coupled non-detachable bearing device; the bearing can be first mounted on the shaft; then the shaft is mounted together with the bearing to the bearing housing hole Inside; if the bearing is small; you can also use a soft metal hammer to tap the end face of the ferrule to force the bearing to reach; but the tapping force must be evenly distributed on the bearing ring.
The bearing outer ring and the bearing housing hole are tightly cooperative, and the inner ring and the shaft are loosely coupled; the bearing can be first mounted on the shaft.
When the bearing ring is tightly engaged with the shaft or housing bore, a special device sleeve is used to press the bearing onto the shaft or housing.
The device for the separate bearing can be easily attached to the shaft or the bearing housing because the inner ring and the outer ring can be easily removed. At this point, it should be paid attention to the fact that the shaft that has been installed inside the inner ring is pierced into the bearing box with the outer ring installed; try to keep it concentric; to prevent scratching the rolling body and the raceway.
When the bearing scale is large; because the required device force is large; or the bearing cooperation with heavy load operation is too large, it is difficult to select the cold state device; then it is necessary to heat the bearing inner ring or the bearing seat beforehand. Carry out the device. In the hot state device; the heating temperature should be strictly controlled. When heating the bearing; the heating temperature should not exceed 1200C; usually it should be 80~1000C. The bearing with dust cover or sealing ring can not be heated; otherwise it will form lubricant Lost. Heating method can be selected by electric induction, oil bath heating and other methods.

Recommend to friends comments close window

Bearing related knowledge

Bearing processing heat treatment process and skill application role of bearing removal, overhaul and discriminating the use of spindle bearing oil function Grinding machine static pressure bearing repair experience Talk about the explanation of the alignment of the drill bearing

This article links to http://
Please indicate the bearing network http://

Previous:The five main rules of the sliding bearing are as follows: Analysis: The method of bearing rust prevention

2021 Quantum Grow Light

Grow Light panel with scientific spectrum, include red, warm white, 6000k, UV IR led, the best grow light for indoor plant growth. also customized ratio by your requirement.

Quantum Board Grow Light is a great ideal for all kinds of indoor garden plants: lettuce, orchid, organic herbs, pepper, strawberries, succulent, hydroponic, medical plants.
Whether it's hydroponics, plants in soil, you can add a touch of magic to every veg and flower with Xeccon grow lights.

grow light strip, grow strip, led strip grow plants, led grow light strip review,led grow light strip kit

Shenzhen Wenyi Lighting Technology Co., Ltd , https://www.wygrows.com