If you have seen the furniture of Farakadan , you will be able to feel her high quality, and can stimulate your deep desire for home art in the heart, the desire for beauty, so you should not tolerate how long you bought it. The appearance of solid wood furniture, today, Farakadan teaches you how to maintain solid wood furniture .
Xiao Bian believes that the following 9 points, your solid wood furniture will be able to shine forever!
Dust removal
Always remove dust, because dust rubs the surface of solid wood furniture every day. It is best to use a clean soft cotton cloth, such as an old white T -shirt or baby cotton. Remember not to wipe your furniture with a sponge or tableware. When dusting, use cotton cloth that has been wrung out after wetting, because the wet cotton cloth can reduce friction and avoid scratching the furniture. It also helps to reduce the adsorption of dust by static electricity, which is good for removing dust from the furniture surface. However, water vapor should be avoided on the surface of the furniture. It is recommended to wipe it again with a dry cotton cloth.
2. Cleaning
In order to remove the traces of the furniture surface caused by airborne contaminants, cooking fumes, smudges during handling, and residues from glazing, we recommend the use of special furniture cleaners. This solvent can also help remove excess wax. They were rubbed together and did not cause any other adverse reactions.
3. Waxing
In addition to frequent dust removal, the surface of wooden furniture is sometimes waxed for further maintenance to increase the aesthetic appeal. We recommend regular maintenance of the furniture using special pure wood furniture glazing wax. In addition, do not choose those silicone-containing polishes, because silicone will not only soften the coating, but also block the pores of the wood, making it difficult to repair. Although waxing often does not harm the coating, we recommend that you only polish one or two times a year. Excessive waxing can also damage the appearance of the coating. The recommended glazing procedure is as follows: (1) Apply the glazing wax to a clean white soft cloth, preferably natural cotton such as cotton. Please save the use of glazing wax, because only a small amount of polish can keep the furniture beautiful for a long time. (2) Wipe the glazing wax onto the furniture in the direction of the wood texture. Use the other side of the soft cloth, if necessary, use another soft cloth to wipe off the excess glazing wax on the furniture surface. (3) Avoid excessive friction during the waxing process. Excessive friction is actually harmful to the matte layer, which can lead to uneven gloss on the furniture surface.
4. Water marks
Water marks usually take a while to disappear. If it is still visible after one month, use a clean soft cloth coated with a small amount of salad oil or mayonnaise to wipe the water mark in the direction of the wood grain. Or cover the mark with a damp cloth, then carefully press the damp cloth several times with an electric iron, and the mark will fade.
5. Hot marks
Use a dry, ultra-fine furniture to coat the special steel wool velvet pad at the hot mark directly in the direction of the wood grain; you can also use salad oil or mayonnaise on the hot mark, take a soft cloth and gently follow the wood grain Wipe, then wipe it with a clean, soft cloth. Finally glazing. The cigarette butts or the unfinished matches leave scorch marks on the furniture lacquer. If the lacquer is burning, apply a fine-grained hard cloth to the matchstick or toothpick, gently wipe the traces, and then apply a thin layer of wax. It can be faded.
6. Burn marks
The cigarette butts or the unfinished matches leave scorch marks on the furniture lacquer. If the lacquer is burning, apply a fine-grained hard cloth to the matchstick or toothpick, gently wipe the traces, and then apply a thin layer of wax. It can be faded.
7. Scratch
If the surface of the furniture is scratched and the wood is not touched, it can be applied to the wound surface of the furniture with the same color of crayons or pigments as the furniture to cover the exposed ground color, and then coated with a thin layer of transparent nail polish.
8. Hardware decoration parts
Simply wipe with a dry cloth and do not use chemical-containing cleaners.
9. Sticky paper
The paper is completely saturated with salad oil, and after a few minutes, it is gently rubbed in the direction of wood grain with steel wool for furniture. Polish after drying.
Galvanized pipe, corrosion resistant galvanized pipe, galvanized welded pipe
Shandong Xinsuju Steel Co.,Ltd. , https://www.sawlpipe.com