7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage

Model NO.: RAL-053
Anodized Thickness: >25um
Material: Aluminum Alloy
Surface Treatment: Anodized, Powder Coated, Wooden Grain, Polished
Trademark: Reliance Aluminum
Transport Package: Export Standard Package
Specification: EN755
Origin: China
HS Code: 760421
Model NO.: RAL-053
Anodized Thickness: >25um
Material: Aluminum Alloy
Surface Treatment: Anodized, Powder Coated, Wooden Grain, Polished
Trademark: Reliance Aluminum
Transport Package: Export Standard Package
Specification: EN755
Origin: China
HS Code: 760421

1. Description:7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
2. Alloy temper: 6060/6063-T6/T5;
3. Standard: EN755, ASTMB221, DIN Standard
4. Surface treatment: Mill finish; Anodizing; Powder coated, wooden grain, Brushed. Polished
5. Application: Construction; Decoration; Armarium; Architecture and etc.

6. Advantage:
1) Pure 99.7% aluminum materials without any scrap used
2) OEM welcome, we can design and cut die to meet customer's special demand
3) Wonderful surface treatment, we can meet customers required on surface
4) Strictly quality control process assured higher quality.
5) Packing safety and convenient.

 

Description		 Aluminium archeticture extrusion profile SGS TEST APPROVAL
Alloy/Temper 6063-T5/6060-T5; 6063-T6/6060-T6 SGS TEST APPROVAL
Surface treatment Mill finishes; Anodized; Powder coated; Wooden grain, Machine/Acid polished and etc SGS TEST APPROVAL
Standard apply EN755; DIN; ASTMB221; GB5237-2008 and etc. SGS TEST APPROVAL
Price SMM/LME Primary aluminum price + the most competitive conversion cost SGS TEST APPROVAL
Mould  policy Each item purchased volume get to 3tons, refund mould payment SGS TEST APPROVAL
Delivery timetable sample: within 15 days; order: within 15 -20 days SGS TEST APPROVAL
Payment term 20% deposit, the balance pay against B/L copy within 7 days SGS TEST APPROVAL
Packing standard Protected film and pearl cotton inside and shrink film outside SGS TEST APPROVAL
Guarantee term If the shipped products can not meet required, the total order amount will be refund back without delay,   or arrange new replacement cargoes instead. SGS TEST APPROVAL

7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage


FAQ For Saving Your Precious Time!
 
Q1: What's the thickness for anodizing film? Can you do 15um?
A: Our normal thickness is over 10 um. Yes, we can do 15um and above.
 
Q2: What color you can do for powder coating?
The thickness for powder coating film?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-100um.
 
Q3: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
 
Q4: How's the weather resistance for wood grain finish D1010?
A: (1). Powder: Akzo Noble Interpon D1010.
(2). Wood grain film: Italian Menphis.
(3). Standard complied: American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather: 10 years color guarantee.
 
Q5: What certification do you have? What's your standard?
A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.
 
Q6: What's the delivery time for samples and mass production?
A: (1). 2 weeks to open the new moulds and make free samples.
(2). 2-3 weeks after receipt of deposit and confirmation of the order.
 
Q7: Can you do deep processing and fabrication?
A: Yes, we have deep processing line in our factory, we can do cutting, drilling, punching, welding and deep fabrication.

Q8: Can you provide special export packing and loading?
A:  Yes, we can follow end customers required for special packing and loading, and we have experienced engineer team to design and improve your idea.

Q9: What's your Quality Control Plan?
A: We have strictly 5S quality control plan in our factory, 1S is Incoming materials quality control, 2S is Production line quality control, 3S is Packing quality control, 4S Warehouse quality control and 5S loading quality control plan. We can avoid the Inferior quality issues our factory.

 
1. Description:7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
2. Alloy temper: 6060/6063-T6/T5;
3. Standard: EN755, ASTMB221, DIN Standard
4. Surface treatment: Mill finish; Anodizing; Powder coated, wooden grain, Brushed. Polished
5. Application: Construction; Decoration; Armarium; Architecture and etc.

6. Advantage:
1) Pure 99.7% aluminum materials without any scrap used
2) OEM welcome, we can design and cut die to meet customer's special demand
3) Wonderful surface treatment, we can meet customers required on surface
4) Strictly quality control process assured higher quality.
5) Packing safety and convenient.

 

Description		 Aluminium archeticture extrusion profile SGS TEST APPROVAL
Alloy/Temper 6063-T5/6060-T5; 6063-T6/6060-T6 SGS TEST APPROVAL
Surface treatment Mill finishes; Anodized; Powder coated; Wooden grain, Machine/Acid polished and etc SGS TEST APPROVAL
Standard apply EN755; DIN; ASTMB221; GB5237-2008 and etc. SGS TEST APPROVAL
Price SMM/LME Primary aluminum price + the most competitive conversion cost SGS TEST APPROVAL
Mould  policy Each item purchased volume get to 3tons, refund mould payment SGS TEST APPROVAL
Delivery timetable sample: within 15 days; order: within 15 -20 days SGS TEST APPROVAL
Payment term 20% deposit, the balance pay against B/L copy within 7 days SGS TEST APPROVAL
Packing standard Protected film and pearl cotton inside and shrink film outside SGS TEST APPROVAL
Guarantee term If the shipped products can not meet required, the total order amount will be refund back without delay,   or arrange new replacement cargoes instead. SGS TEST APPROVAL

7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage
7075-T6 Aluminum/Aluminium Extrusion Profiles for Industrial Usage


FAQ For Saving Your Precious Time!
 
Q1: What's the thickness for anodizing film? Can you do 15um?
A: Our normal thickness is over 10 um. Yes, we can do 15um and above.
 
Q2: What color you can do for powder coating?
The thickness for powder coating film?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-100um.
 
Q3: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
 
Q4: How's the weather resistance for wood grain finish D1010?
A: (1). Powder: Akzo Noble Interpon D1010.
(2). Wood grain film: Italian Menphis.
(3). Standard complied: American AAMA Standard.2603
(4). UV test:1000 hours.
(5). Salt spraying test:1000 hours.
(6). Normal weather: 10 years color guarantee.
 
Q5: What certification do you have? What's your standard?
A: We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.
 
Q6: What's the delivery time for samples and mass production?
A: (1). 2 weeks to open the new moulds and make free samples.
(2). 2-3 weeks after receipt of deposit and confirmation of the order.
 
Q7: Can you do deep processing and fabrication?
A: Yes, we have deep processing line in our factory, we can do cutting, drilling, punching, welding and deep fabrication.

Q8: Can you provide special export packing and loading?
A:  Yes, we can follow end customers required for special packing and loading, and we have experienced engineer team to design and improve your idea.

Q9: What's your Quality Control Plan?
A: We have strictly 5S quality control plan in our factory, 1S is Incoming materials quality control, 2S is Production line quality control, 3S is Packing quality control, 4S Warehouse quality control and 5S loading quality control plan. We can avoid the Inferior quality issues our factory.

 

Fujitec Elevator Spare Parts

Fujitec Elevator Spare Parts, Fujitec Elevator Parts

Fujitec Worldwide
Founded in Osaka, Japan in 1948, Fujitec Co., Ltd. has operational headquarters located in the Americas, Japan, South Asia, East Asia and Europe. With a network of 11 state-of-the-art manufacturing facilities and several sales service offices, the company strives to lead the industry in safety, innovation and quality. Fujitec`s worldwide organization includes four research and development/engineering centers which are located in Japan, Singapore, China and the United States.
In Japan, Fujitec's [Big Wing" facility houses a 560-foot research tower, the tallest of its kind in the world. This facility is focused on developing cutting-edge technologies and integrating all phases of product development, design and manufacturing. Fujitec's research and development facility in China is located in the Song Jiang Industrial Zone in Shanghai and is approximately 150,000 m2 (1.6 million sq. ft). This space is utilized for parts and components procurement. Fujitec America continues to utilize the landmark, blue-capped 220-foot elevator research/test tower located near its U.S. headquarters in Mason, Ohio.

Fujitec Elevator Spare Parts, Fujitec Elevator Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.zjsmartcommercialescalators.com

Posted on