The temperature in spring rises. Changes in the indoor temperature and humidity may cause floor and furniture shrinkage and cracking at any time. Some floor maintenance rules allow the floor to glow in the spring.
Natural floor
Rule one:
The frequency of floor waxing should not be frequent
The dry weather in spring, especially the current heating in the room, can easily lead to a drier indoor air. In order to make the floor “skin†more moist, increasing the number of floor waxing and extending its lifespan has become the choice of many people.
Appropriately waxing the floor can play a role in preventing moisture, preventing damage, increasing surface luminosity, and facilitating cleaning. However, if the number of times of waxing is too frequent, the floor may be damaged. Frequent waxing will cause the wax wax layer to overlap, and there will be a gray layer in the middle of the wax layer, affecting the waxing effect.
At present, more and more families are laying laminate flooring, and the surface of the laminate flooring is made of abrasion-resistant paper. The composition is “aluminum oxide,†which makes the wax invisible to the interior of the floor and can only adhere to the floor surface. After waxing, people will leave footprints while walking. Over time, the surface of the floor becomes like a “big faceâ€, which affects the appearance of the floor and is difficult to wipe.
When air-drying, laminate flooring is not suitable for waxing or decontamination cleaning and maintenance, and should not use sanding polishing. It can be wiped with a wrung rag and then treated with a care solution. The hard-to-clean areas are removed with a special cleaning agent. If the home is paved with solid wood flooring, waxing times should not be frequent.
Rule two:
Increase the humidity and avoid direct "water compensation"
Indoor drying tends to cause floor cracking, increasing the humidity of the floor surface can effectively alleviate the cracking and warping of the floor. However, it is not suitable for large-scale "water supplements" to moisturize the floor, and indoor humidity should be actively adjusted.
The indoor spring should maintain a certain temperature and humidity, in general, the temperature should be less than 28 °C, humidity is maintained at between 50% to 70% of the best, not less than 40%. Such temperature and humidity can keep the wooden floor in a relatively stable state. If the natural humidity is not reached, the humidifier can be used to humidify.
When maintaining solid wood flooring, you can use a vacuum cleaner or a broom to clean the surface of the dust, and then use a rag or mop that has been soaked and wrung until it does not drip. In case of stubborn stains, wipe with a neutral cleaning solvent and wipe with a wrung cotton mop. Do not use organic solvents such as acids, alkaline solvents, or gasoline. The laminate flooring can be wiped with a slightly moistened mop to increase the surface humidity of the floor. In case of cracking at local locations, the humidity should be increased after the filling process to facilitate the restoration of the floor. Do not use liquids such as corrosive gasoline and soapy water to wipe the surface of the floor.
Rule 3:
Prevents fine particles from scratching the floor
Small sand stays on the surface of the floor for a long time. After walking back and forth, gravel wear marks appear on the floor surface. In addition to gravel, dust, hard-soled shoes, metal sharps, glass tiles are the nemesis of the floor “skinâ€, especially the northern spring more sand, the problem of fine gravel, dust is more prominent.
Links: Wonderful decoration inspiration will be different from the original collection
Flooring purchase Nature Flooring Del flooring Interior Decor Glass Home Improvement Heating Humidifier Glass Furniture
Polyurethane Powder Coating is outdoor durable polyurethane powder coating which offers :
- outstanding film appearance and toughness with superior weathering properties.
- They are true alternative to high quality liquid paints and exhibits superior chip, mar and scuff resistance in addition to corrosion and chemical resistance.
- For more details please refer to official website ChinaPowderCoating.com .
APPLICATION :Fluidized Bed,Electrostatic spraying gun .
CURING : 200C/ 10MINUTES
Polyurethane Powder Coating
Fluidized Bed Powder Coating,Polyurethane Powder Coating,Electrostatic Powder Coating
Jinhu Color Powder Coating Co.,Ltd , http://www.powdercoatingscolor.com