Many owners complain that the color of the paint on their walls is not uniform, uneven or there are traces of touch up paint. This is probably due to the carelessness of the master decorator in the painting process on the wall. Well, Mr. Decoration City told reporters that the owner had better understand first which steps the entire painting process needs and what to look out for. If you know what to do, you can prevent it as soon as possible.
Ot Yaju Home Furnishing Museum    Qidan Lighting Store
Steps and details can not be ignored
Paint can be divided into 6 steps. The first is preparation. The door, window frame, furniture and paint connection, paste color paper protection. Well-made wooden cabinets, partitions and other furniture should be sealed with newspapers so as not to be soiled by paint.
The second is color adjustment. For walls that require color, the area should be accurately calculated in advance and the materials used should be evenly distributed. Then the primer is applied to prevent the wall surface from being wet and the color of the top coat is uniform. This prevents the appearance of water stains on the boards.
The third is roller coating construction. The order of topcoat construction: ceiling, lines, and back wall. Paint on the wall at least two times, the first time the paint can be added 5% to 10% of the water, to facilitate the absorption of the wall, the second time the paint can not add water, with the first pass of the coating there is a certain interval. Roller coating requires the use of two roller brushes at the same time. The coarse roller brush is followed by the roller brush. Use a thick roller to evenly paint the paint on the wall. Use a fine roller to brush over the rough roller. Brush it again to make the wall paint delicate and brush out the desired pattern.
The fourth is brush construction. Use a brush to make up the paint on the edges of the wall and corner of the brush.
The fifth is polishing the wall. When the paint on the wall is dry, sand the wall with sandpaper to reduce the brush marks on the wall and make the wall more smooth. When polishing, be careful to feel the smoothness of the wall from time to time in order to judge where to polish. It should be noted that when sanding, try to use finer sandpaper. Usually the soft texture of the putty (such as 821) with 400 ~ 500 sandpaper, hard texture (such as wall lining, easy to flat) 360 ~ 400 The number is better. After thoroughly polishing, thoroughly clean the wall.
Sixth, cleaning and inspection. Clean the paint marks on the foot line and other places, check whether the color of the wall meets the design requirements, and whether the color of the brushing surface is the same, so as to prevent the bottom, the brush, the powder, the bubbling, the bite color and the flow drop. And other quality defects.
Paint paint purchase construction acceptance three trees paint furniture paint lighting decoration design decoration home
Durostone Sheet or Synthetic stone is a kind of green and environment-friendly stone, which is composed of more than 95% natural stone powder, with a small amount of polyester and adhesives, mixed in vacuum, pressurized, and formed by vibration
Definition:
Durostone Sheet comes from the "stone kingdom" Italy, the English "composite stone".
According to the raw material into synthetic marble, synthetic quartz two kinds.
With the advantages of natural stone, large areas are paved with achromatic, environmental protection, high strength and complete variety.
Widely used in hotels, shopping malls, office buildings, public places, family walls, floors, etc.
Production process:
1. Collect stone materials from the quarry
2. Mix resin and stone powder and other materials in vacuum
3. Vacuum extruding ingredients
4. Leave about 10 days in the factory
Cut into large plates according to requirements
6. Measurement and polishing
7. Cut from the big board to the required panel
8. Waxing and corner handling and packaging
9, storage,
USES:
Main use in the wall of building adornment, ground, mesa, stair step.
The synthetic stone is used in the following areas:
1. The airport, the ground of the airport, part of the wall, the hallway, the bathroom table and the wall.
2. The public parts of the building and office buildings, such as the floor of the hall, the wall of the wall, the wall of the floor of each floor, the wall of the toilet, floor, mesa and elevator well.
3. Square, mall, these places can be used in large areas such as walls, floors, toilets, elevators and so on.
4, villa, with mesa main, in toilet also can often arrive, still have stair step.
5. Other places, such as public buildings, museums, exhibition centers, hospitals, schools, etc.
Advantages:
1, colorless difference, meet the market's natural marble directly from the mine mining, the slightly and the formation of mine decided the composition of natural stone and marble texture, so led to a number of natural stone texture of inconsistencies, and synthetic stone is to smash of natural marble, and processing and forming, so can very good control of color difference, this synthetic stone within a certain range can look without clear off color, this has the advantage of convenient and the laying of large area, as a whole to maintain consistent style.
2, environmental protection, natural marble is different according to the composition and properties, some deep color radioactive substances, and synthetic stone in choosing a natural stone powder can avoid these substances, so as to achieve no radiation environmental standards.
3, close to the natural stone texture, synthetic stone can be very close to the natural texture, color and so on some colors, the effect of synthetic stone laying large area can completely and natural stone.
4. Excellent performance, good absorption rate, and structure more closely than natural stone.
5. No crack, anti-fouling, easy to clean.
Specification: The thickness of sheet material can be produced from 3mm to 50mm,the usual specification of 3-50mm is 1150mm* 1250mm, It can also be customized according to requirements, and the width cannot exceed 1220mm, and the length is not limited
Color: Green ,can also be made another color, and the color order is 500KG.
Modified varieties: can be added to the fiberglass, copper powder and molybdenum disulphide to enhance the bar.
Add antistatic agent to the permanent antistatic electric bar, and the volume resistance value is between 6 to 9 power of 10.
Add flame retardant to flame retardant rod from UL 94V-0 to HB flame retardant grade. Other modification requirements are customized according to customer's actual use.
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
Durostone Sheet
Durostone Sheet,Durostone Sheet Price,Cheap Durostone Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com