Solid wood floor without noise installation and acceptance

Solid wood flooring is a floor decoration material formed by drying and processing natural wood. The natural wood texture and color pattern it presents gives a natural, soft and rich texture, and it is an ideal material for floor decoration in bedrooms, living rooms, and study rooms because of its cool in winter and cool in summer and good touch.

First, the preparation before laying

1. Ground flatness measurement: Measure the flatness of the ground and decide whether to do ground leveling.

1) The floor area laid is within 50 square meters, the ground flatness error is more than 2 centimeters or more than 2 millimeters. It is recommended that the ground leveling be handled.
2) The installation height of the floor differs from the height of other ground materials by more than 5 mm. It is recommended that the floor be leveled.
3) If the flatness error is large or the height difference from other ground materials is large, it is recommended to use a cement mortar for overall leveling. Otherwise, only the waterproof cement mixed cement mortar is required to be used for local leveling treatment.
4) After ground leveling, the local flatness error must not exceed 3 mm.

2. Ground moisture measurement: Use the electromagnetic wave type moisture content measuring instrument to measure the humidity of the ground, one test point every 1.5 to 2 meters; The humidity on the ground is large. It is recommended to delay the installation period, add moisture-proof mats or make the floor waterproof.

3, determine the installation method and calculate the amount of accessories: the proposed installation direction of the floor, skirting board, sliding doors, floor-to-ceiling windows, low cabinets, platforms, stairs and other parts of the specific installation method for the owner to choose to determine. If the owner’s special requirements and technical requirements are inconsistent, special instructions signed by the owner are required.

4. Measure the actual area, paint the grass to indicate the size of each part, and calculate the actual floor and accessories.

5. Sign the contract with the owner to determine the model and model of the purchased product.

Second, the floor to the scene of the open inspection

1, the moisture content of the floor - solid wood flooring moisture content and the local equilibrium moisture content is close.

2, the appearance of the quality of the floor - paint film quality and wear resistance, cracks, processing ripples, etc.;

3, the main floor size and deviation - length, width, thickness, etc.;

4, the shape of the floor position deviation - assembled from the seam, the assembly of the height difference and warpage.

Third, the choice of floor color

Solid wood flooring is a natural material and chromatic aberration is normal. Through manual selection and adjustment, the transition can be natural, beautiful, lively and full of vitality.

1. For wood species with relatively small color difference, do not grade, adjust directly when laying.

2, for the color difference of the species, can be divided into deep and shallow categories. Different shades can be installed in different areas or in different shades;

3, in the same color of the floor installation, in principle, the chord board and the cutting board should be laid.

Fourth, the laying of the keel requirements

1, according to the length of the floor, determine the spacing of the keel; keel spacing should not be too large.

2, according to the length of the laying floor, 300 mm from the wall to play a baseline, to ensure that the keel installation position and the reference line at a right angle of 90 degrees.

3, determine the 2-3 keel as a benchmark, adjust the height with other ground materials, so that the transition of natural and beautiful. Strictly control the flatness of the upper surface of the keel.

4. Use a wooden wedge or other hard material to lift the suspended keel; use a dragon king plastic tyrant or styrofoam to fix the wooden wedge and keel, and fill in the suspended part of the keel.

Fifth, the floor laying requirements

1. Stabilize the wooden floor between the floor and the wall to ensure that the floor is 8-12 mm from the wall.

2. After laying the first two rows of flooring, it is necessary to straighten the wire; during the laying process, it is necessary to pull the wire straight to ensure the laying quality.

3, according to the room or area division, plus transition (expansion joints) to prevent the floor arch.

4, consciously adjust the color of the floor, making it a natural transition.

5, skirting board interface tight, securely installed.

Paving floor acceptance cement window paint staircase room decoration living room small study bedroom

Pipe Fitting

Pipe Fitting, Steel Pipe Fitting, Stainless Steel Pipe Fitting, Sanitary Pipe Fitting

Novelty Trading Development Co.,Ltd , http://www.novelty-hardware.com

Posted on