1 Installation of glass wool board
1, 1 glass wool board row board requirements: according to the standard whole sheet (size: 1200X600) from the bottom to the horizontal horizontal transverse 1/2 board length interlaced. Vertically staggered and pasted from the corners of the wall to ensure that the corners are straight and vertical. The glass wool boards at the yin and yang angles should be interlocked and interlocked. The glass wool at the corners of the door and window openings shall not be spliced. The whole glass wool board shall be used to cut the forming cuts and the board surface shall be perpendicular. The corners of the wall surface shall be pasted with an insulation board of not less than 300 mm.
1, 2 Glass wool board is designed to be laid before use. The calculated size is cut and the straight line error of the trimming edge should be less than 5mm.
1,3 Glass wool board laying should be connected from top to bottom, and the glass wool board should be laid in order. When encountering the door and window opening, it should meet the requirements of the relevant atlas.
2 board anchoring and surface treatment
2, 1 Anchoring: The installation depth of the anchor plate installed in the insulation board is not less than 30mm. The anchoring screw of Φ8X120mm and Φ8X100mm is used for anchoring, and the electric hammer is used to drill the outer wall with a hole diameter of 10mm; the hole depth is 120-140mm (including the thickness of the thermal insulation board), and the plastic expansion bolt is installed and sturdy to make the glass wool board and the outer wall The face is tightly combined. After the anchoring point is tightened, it should be lower than the surface of the glass wool board by 1~2mm. The arrangement of anchor points: anchor points are set in the four corners of the glass wool board and in the middle of the horizontal joint.
2, 2 The anchor bolts are installed with a longitudinal spacing of 600mm, a lateral spacing of 600mm, a plum-shaped arrangement, and the corners of the base wall are encrypted to a spacing of 300mm, and meet the requirements of the design and related standards.
3 handling of special parts of the system
3, 1 When encountering the window door opening, the length depends on the wall part.
To strictly control the thickness and width of the glass wool board, it must be ensured that the combination is consistent, and the corner parts should be bitten and lapped. The apparent density of the glass wool board should meet the design requirements. The surface of the glass wool board shall not be exposed for a long time. After the glass wool board is installed on the wall, it shall be promptly reported and the stone shall be installed outside.
The use of good insulation technology and materials in construction and industry can often achieve twice the result with half the effort. Beiheng Thermal Insulation Materials Co., Ltd. First-class product quality and price advantage Sincerely welcome friends from all walks of life to visit, inspect and negotiate business.
Dacheng County Daguangan Xiangdong Thermal Insulation Material Factory
24-hour telephone contact manager Zhang 13473696600 15731614448
Customer Service QQ Email @qq.com
Office Phone: 0316-5950150 Fax
Address: Daguangan Industrial Development Zone, Dacheng County, Langfang City, Hebei Province (The factory is available for inspection)
Company website http://dcxd150.chinawj.com.cn/
Anti Static Flooring,Anti Static Floor Tiles,Anti Static Vinyl Flooring,Anti Static Tiles
JIANGSU HUAJING FLOOR TECHNOLOGY CO.,LTD , http://www.huajing-floor.com