Cutting fluid selection should be paid attention to when processing aluminum and aluminum alloy

1. Why does the cutting fluid corrode aluminum products?
Aluminum corrosion is divided into chemical corrosion and electrochemical corrosion. Aluminum is corroded in weak acid (less than 4.5) or strong alkali (greater than 8.5).
Prevent chemical corrosion: The cutting fluid itself is alkaline. It is best to use a cutting fluid with a pH of less than 8.5 and an aluminum corrosion inhibitor. Also, the alkaline additive in the cutting fluid will also produce a yellow spot after air drying on the surface of the aluminum workpiece, which is also corrosion.
Electrochemical Corrosion: The processed product should not be placed on iron plates or iron products, and with cutting fluid, it is easy to produce electrochemical corrosion.
2. The difference between aluminum cutting fluid and metal cutting fluid
Metal cutting fluids generally have emulsions, kerosene, and diesel oil, and the range of choice is relatively large; aluminum cutting fluids generally use kerosene or kerosene + paraffin solution . The advantage of using kerosene or kerosene + paraffin in aluminum cutting fluids is that the chips are not easy to be knives and the workpieces are better. Milling aluminum parts and other cutting fluids are not as effective as kerosene + paraffin.
In fact, it seems that there is no difference, the performance is similar, have anti-corrosion, anti-rust, cooling, environmental protection and other properties. Also widely used in stainless steel, mold. Only the aluminum product cutting fluid is relatively tested for aluminum alloy, and it is also easy to use in aluminum alloy, and the effect is also obvious, and the metal cutting fluid can be used on the metal cutting fluid.
3. Classification and use of emulsified cutting fluid and synthetic cutting fluid
The synthetic cutting fluid does not contain mineral oil and is composed of water-soluble rust inhibitors, oily agents, extreme pressure anti-wear additives, surfactants, preservatives and defoamers. The diluent is transparent or translucent. It has excellent cooling and cleaning performance, suitable for high-speed cutting; solution transparent, with good visibility, especially suitable for modern processing equipment such as CNC machine tools, machining centers, and long service life.
The concentrate of the emulsion is mainly composed of mineral oil or synthetic oil (content of 50% to 80%), emulsifier, rust inhibitor, oily agent, extreme pressure antiwear additive and preservative. When the concentrate is used, it is directly diluted with water to form an emulsion, and the diluent is opaque and milky white.
4. Selection of cutting fluid when cutting stainless steel
The selection principle of cutting fluid must meet the requirements of cutting performance and performance. It should have good lubrication, cooling, rust and cleaning performance. It can meet the process requirements during processing, reduce tool loss, reduce the surface roughness and reduce the surface roughness. Power consumption and increase production efficiency. At the same time, the stability of use should be considered. Therefore, the selection of cutting fluid should follow the following principles:
1) The cutting fluid should have no irritating odor and contain no harmful additives to the human body to ensure the safety of the user.
2) The cutting fluid should meet the requirements of equipment lubrication and protection management, that is, the cutting fluid should not corrode the metal parts of the machine tool, and will not damage the machine seals and paint, and will not leave hard gelatinous deposits on the machine guide rails, ensuring the use of equipment. Safe and working properly.
3) The cutting fluid should meet the anti-rust requirements between the workpiece processes and not rust the workpiece. Sulfur-containing cutting fluids should not be used when processing copper alloys. When processing aluminum alloy, the cutting fluid with a neutral pH should be used.
4) The cutting fluid should have excellent lubricity and cleaning performance. The cutting fluid with the highest cardless bite load value and small surface tension is selected and evaluated by the cutting fluid test.
5) The cutting fluid should have a long service life, which is especially important for the machining center.
6) The cutting fluid should be adapted to a variety of processing methods and a variety of workpiece materials.
7) The cutting fluid should be low in pollution and have a waste liquid treatment method.
8) The cutting fluid should be cheap and easy to prepare.
Therefore, when selecting the cutting fluid, the user can first select two or three kinds of cutting fluids with better comprehensive performance according to the specific processing conditions of the enterprise. After the actual trial, determine the cutting fluid with the performance that meets the processing requirements and the price is suitable. The performance of the workpiece material is important for the choice of cutting fluid.


What is a TSA customs lock?

Customs TSA lock means that US Customs transit cargo and baggage transport customs cargo safety testing, the need to ensure universal TSA baggage security and the use of international customs GSM dedicated key.

Why use TSA customs lock?

Starting in January 2003, TSA requires all airport baggage entering the United States must be opened for inspection, but TSA issued a warning: unless TSA certified locks, or do not otherwise be checked baggage unlocked or destroyed by customs have the right to pry check luggage locks.

Benefits Customs TSA lock?

Check how TSA lock Customs: Customs inspector has a TSA lock key hand, be very careful when you open the baggage inspection to ensure safety, but also to re-lock after checking luggage.



TSA332ZHANSHItsa302TSA3TSA1TSA330LV2TSA301YIN2

TSA Locks Luggage Locks Combination Padlock

Tsa Travel Locks,Luggage Combination Locks,Tsa Combination Lock,Travel Luggage Lock

Shengping Safety Protection Locks Manufacturer , https://www.chinajiuzhou.com

Posted on