Paint decoration not only has a longer life span, but also has a more economical construction cost, and it is popular with the public. Many homeowners do not know much about decorating. How do you paint the wall paint ? You must be puzzled in your heart. Today we introduce the following content, to understand how to paint under the wall paint it!
How to paint the wall paint - preparation
1. If it is a new house wall construction, the grassroots cleanup does not take a lot of time, but it needs to detect the alkaline and water ratio of the wall, which can be detected by using professional instruments and pH test paper. Simply put the pH test paper in distilled water to get it wet and stick it to the wall. After a while, get the numerical value of the wall according to the color change.
2 If the old house is refurbished, the cleaning work will take some time. First, wipe the wall with a damp towel or sponge. After completely dry, clean the wall base. If the surface is smooth, simply use sandpaper to grind it. If there is a crack problem, you need to use plaster to repair it and make the wall flat.
How to paint the wall paint - Finished product protection
In the construction of wall paint, dust, paint, and other substances are likely to fall. Therefore, in order to avoid getting the finished decoration project to be finished, it is necessary to protect the finished product, and to a certain extent, it also brings convenience to cleaning.
How to paint the wall paint - putty
Followed by the process of scraping the putty, it is usually necessary to scrape the putty twice, so as to not only completely cover the original wall paint but also make the wall even. If there is a partial slope or unevenness on the wall, repair work must be performed first. The putty should be top-down, and the scraper must be even and level. Each putty construction should be separated by more than two hours. The putty is finished and the wall surface can be polished after two days. It can be lightly ground with sandpaper.
How to paint the wall paint - paint construction
After the scraped putty wall is polished, it can be painted with a primer. It only needs to be applied once. However, the paint should be evenly formed. After the paint is completely dried, the finish can be applied. The topcoat is usually painted twice. The first time the topcoat needs to add the appropriate amount of water to allow the wall to better absorb. The second time the topcoat does not need to add water, but it needs to wait for the first time before the paint finishes. When brushing, it should be noted that the thickness of the paint film should be uniform, brushing uniform, no grainy.
How to paint the wall paint - post-work
After the wall paint is applied, after the paint is dry, it is necessary to use sandpaper for sanding to make the wall more smooth. It usually takes one week. In addition, it is also necessary to check whether there are any traces of paint on the floor and baseboard, and if necessary, clean it up in time, and if the wall paint color is the same.
How to brush on the wall paint , Xiao Bian will be introduced here temporarily, I hope to help you. If you want to learn more about paint, you can pay attention to this website information, and more exciting content waiting for you.
How to paint the wall paint wall paint
Wire Containers
Wire Containers
Hebei Yicheng Wire Mesh Products Co., Ltd , https://www.yc-fence.com