Summer is coming, because people wear thin clothes, some more diligent and saving consumers will choose to wash their clothes. This not only washes the clothes relatively clean, but also saves water and electricity compared to the washing machine. However, there is such a sentence "electronic products are broken", so if the washing machine does not need to pay attention to maintenance. Today, the author will tell you about the maintenance work of the washing machine in the summer.
(1) If the washing machine is out of service for a long time, first remove the accumulated water and keep the drum dry. The drum washing machine opens the drain valve in the lower right corner to ensure no residual moisture.
(2) Try to avoid places where it is wet, corrosive gas and strong acid and alkali, so as to avoid rusting of metal parts and electrical components to reduce insulation performance.
(3) If it is a pulsator washing machine, if there is no oil hole on the pulsator Shaft, the washing machine should be oiled once to prevent rust.
(4) When storing for a long time, after the machine is dried, it is best to cover it with a plastic cloth or cloth cover to avoid dust erosion and keep the washing machine bright and tidy.
(5) Unplug the power supply and close the inlet valve to avoid accidents when not in use for a long time.
(6) Do not expose to direct sunlight for a long time, especially for plastic devices to avoid fading and aging.
Ceramic components for semiconductor equipment have high requirements in terms of material purity, dimensional accuracy, mechanical properties, thermal properties, electrical properties, etc. Silicon carbide ceramics are a class of materials that have been proven in the market to have excellent performance for semiconductor equipment components. FLK has achieved a breakthrough in the manufacturing technology of silicon carbide ceramic components for semiconductor equipment by using additive manufacturing technology. It is a product with high purity, high temperature characterization, high thermal conductivity, high temperature resistance, and excellent friction and wear resistance, and can meet the needs of many application scenarios of ceramic parts for semiconductor equipment. This series of products, with short production cycle, standardized batch, and can achieve a more suitable for the semiconductor industry efficient and high quality production of differentiated structure.
Semiconductor,Silicon Carbide 3D Printing,Customized 3D Printing,3D Printing Service Semiconductor
Ningbo FLK Technology Co., Ltd. , https://www.flk-global.com