| Home>Bearing knowledge> Bearing industry high skill to add drive bearing steel advancement (2) |
High-skilled bearing industry to drive the bearing steel to advance (2)
Source: China Bearing Network Time: 2014-03-05
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1) High resistance to plastic deformation;
2) High anti-collision and wear function;
3) High rotation accuracy and scale accuracy;
4) good dimensional stability;
5) Long service life and high reliability.
In order to satisfy the above requirements for the functions required for rolling bearings; the following basic functional requirements are proposed for bearing steel data:
1) high touch fatigue strength;
2) After heat treatment, it should have high hardness or hardness that can satisfy the functional requirements of the bearing;
3) high wear resistance and low conflict coefficient;
4) high elastic limit;
5) outstanding impact toughness and fracture toughness;
6) Outstanding dimensional stability;
7) Outstanding rust prevention function;
8) Outstanding cold and hot processing functions.
The quality bump of the bearing steel data plays a vital role in the processing quality, service life and reliability of the bearing products. Currently; following the rapid development of China's bearing industry; the number of bearing products matching the domestic host manufacturers Or the number of external exports; each year is added at a larger rate of addition; the demand for bearing steel is the same as a larger share. According to incomplete statistics; the annual demand for bearing steel in China has reached 1.5 million in recent years. About tons (including high carbon chromium bearing steel, carburized bearing steel, stainless bearing steel and special bearing steel).
At present; the oxygen content of bearing steel produced by special steel mills in most domestic countries can be satisfied with the requirements of the new national standard; the oxygen content of die-cast bearing steel produced by special steel mills with good quality bearing steel can be controlled in the range of 9-20ppm. The oxygen content in the continuous casting bearing steel can be controlled within the range of 6-10ppm. It can be seen that the oxygen content in the bearing steel produced by the special steel producers in China is close to the level of the advanced countries producing bearing steel.
In the past few years, the No. 5 Steel Plant sent the personally produced die-cast bearing steel to SKF for inspection and obtained the company's certification. Jiangsu Xingcheng Iron & Steel Co., Ltd. has also obtained internationally from SKF, FAG, NSK, NTN, etc. Known as the bearing company's certification or promised that their bearing manufacturers in China use the bearing steel produced by the factory to make bearing parts.
However, we have seen the remarkable achievements in these years; we should also be very clear about the status quo of China's bearing steel quality. The quality level of bearing steel produced by China's bearing steel slows the quality stability of bearing steel produced by various manufacturers. In terms of; there is still a large distance from the quality level of developed countries.
Due to the entry of foreign famous bearing production companies; and the adjustment of the industrial structure of China's bearing industry; in the bearing products produced by bearings in China; high-skilled added value such as automotive bearings, railway bearings, machine tool spindle bearings, metallurgical machinery, and household appliances The share of bearings will be greatly increased; due to the high precision, low noise, long life and high reliability of these bearings; the metallurgical quality of the bearing steel used will be higher. Bearing companies are measuring The quality of bearing products is good or bad; in addition to the processing quality and service life of bearings; the reliability of the bump is the most important measure. With the development and continuous improvement of China's shopping mall economy; everyone's demand for product quality is getting higher and higher; The users of the products are more and more critical to the product; they attach great importance to the advanced nature and reliability of the purchased products; this makes the demand for the bearing products to produce the company's function and reliability requirements for the bearing. More and more severe; due to many mechanical products; bearing function and reliability directly The function and reliability of its products. Therefore, China's bearing and bearing steel production companies should carry out the new situation and new demands according to the bearing profession; change the concept that the past is full of the status quo and only need to produce output without selling it; It is well known that if the bearings and bearing steels produced in China are still at the current level of quality; in the near future, the predictions of foreign markets occupying Chinese shopping malls become practical. At present, the annual import of bearings and bearing steels in China is constantly increasing. Strong evidence. Therefore, we must know that shopping malls have no national boundaries; there is no national border in the face of quality; it is impossible to guarantee the backwardness with the "to be patriotic" as a prophecy!
Recommend to friends comments close window
| Bearing related knowledge |
| Several typical dynamic pressure bearing layouts and the use of wind power pitch bearing spraying equipment to reduce the labor of the SKF bearing smoothing method which is the bearing speed (2) Characteristics of single row tapered roller bearings |
This article links to http://
Please indicate the bearing network http://
Previous:The application process of KOYO bearing focuses on the next issue: Power plant high-voltage motor bearing "protection technology common sense" inventory
The working principle of a High Flow Peristaltic Pump like a snake swallowing an egg. The hose is constantly squeezed through the roller to make the hose generate pressure and push the liquid forward. Our designers make the Peristaltic pump head and hose fit perfectly by designing precise roller size and pump head structure. So as to achieve the purpose of accurate liquid metering transmission or filling
1. Clean and pollution-free: the fluid only passes through and touches the peristaltic pump hose.
2. High precision: constant current, reproducibility of up to 0.5%, and flow can be precisely adjusted.
3. Low shear force: It is an ideal tool for conveying shear-sensitive and corrosive fluids.
4. Corrosion resistance: it can transport various fluids, such as organic solvents and corrosive liquids.
5. Idling and dry operation: air or gas-liquid-solid three-phase mixed transportation can also be transported.
6. Possess self-priming ability: self-priming, no need to fill the pump, no need to empty.
7. With stop valve function, no siphon, no seals, stop valve and check valve function.
8. Two-way conveying function: reverse pumping and back-suction functions can be realized by changing the direction of the pump runner.
9. Simple maintenance: only need to replace the peristaltic pump hose, no valve and seal replacement.
High Flow Peristaltic Pump,Additive Peristaltic Pump,Polishing Liquid Pumps,Intelligent Transfer Peristaltic Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com