What if the bearing is damaged?

Source: China Bearing Network Time: 2014-08-18

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Bearings are attributed to fine parts; therefore, the demand is quite stable when used; that is, the use of high-function thrust ball bearings; if not used properly; can not reach the expected function; and simply damage the bearings. Thus; Eastern Hemisphere Hardware Net professionals advocate the use of bearings should focus on the following:
Usually grease is smooth; does not remove the bearing; directly fills the smooth grease. When the oil is smooth; usually does not need to be removed; however; for instruments or high-speed bearings, etc.; to be cleaned with clean oil; remove the rust inhibitor applied to the bearing . Remove the bearing of the rust inhibitor; easy to rust; so can not be placed at will.
First, the use of the device should be carefully and carefully not allowed to force the stamping; the hammer is not allowed to directly hit the bearing; the pressure is not allowed to pass through the roll.
Second, use appropriate and precise devices to try to use special things; try to avoid the use of cloth and short fibers and the like.
Third, to avoid the corrosion of the bearing directly when taking the bearing by hand; to wash away the sweat on the hand; and apply high-quality mineral oil before operation; especially in the dry season and summer to pay attention to rust.
Fourth, adhere to the bearing and its surrounding environment, even if the invisible shallow dust enters the thrust ball bearing; it will also add bearing wear; oscillation and noise.

Recommend to friends comments close window

Bearing related knowledge

Product Features and Related Properties of Tapered Roller Bearings
SKF bearing related terminology analysis of axial displacement of bearings equipped with bearings

This article links to http://
Please indicate the bearing network http://

Previous:Bearing removal, overhaul and discrimination Next: Sealing basics

Stainless Steel Analogue Junction Box

JXHS series Junction Box advanced technology during production, stresses the details during design, implements design standard during processing, and has high consistence of product quality. It has various features such as strong damp proof, anti-corrosion and anti-electromagnetic capacities and high adjustment accuracy, and is suitable for various adverse environments. Its main advantages include:
The product uses own mold to make technologic design, the housing uses aluminum and silicon alloy and upper protrusion and lower sinking structure is used so as to ensure good sealing performance; protective grade reaches IP 68.
Main parts are imported, wiring bar is welded with precise anti-surge electronic components, which can prevent Load Cell damage caused by lightning and power grid surge voltage.
Whole device uses stainless steel grounding bolts to ensure reliable grounding during operation.
Assembly of junction box uses not-loose screws so as to avoid loss during load cell wring.
Wiring board uses combined screws for assembly, which are convenient for removal.
In order to ensure protective effect, force and diameter of tightening parts have introduction.

Metal Junction Box,6-Wire Stainless Steel Junction Box,4-Wire Stainless Steel Junction Box,Stainless Steel Analogue Junction Box

SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com