Bnp-8 Bonded NdFeB Magnet with Grey Coating for Motors

Bonded ndfeb magnet with grey coating for Motors, Permanent Ndfeb Plastic bonded magnet, Ferrite injection bonded magnet, Bonded magnet Assembly

Injection molded magnets are available using ferrite, neodymium-iron-boron, or blends of magnetic materials to achieve an extensive range of properties. Binder types include Nylon 6 and 12, PPS, and Polyamide. The binders and magnetic alloys are capable of a wide range of application temperatures from below -40° C to above 180° C. The Injection molding process is particularly well suited to molding very intricate shapes and thin walled parts. The finished parts can be either very simple or complex in geometry.
Magnetic materials can be insert injection molded directly inside or against an existing component to produce assembly pieces. Injection molded magnets dimensionally conform to mold cavities, which are precisely machined, resulting in finished products which usually do not require further finishing operations. This eliminates subsequent operations and reduces total cost.
Injection Molded:
Binder Types / Nylon / PPS / Polyamide.
Temperature Range -40c 180c
Very Tight tolerances off tool ( 0.002 -0.003 Typical )
Very good mechanical strength
Compression Bonded:
Higher Magnetic Strength due to higher magnetic particle density.
Epoxy Binder / Resistant to normal industrial solvents and automotive fluids
Epoxy Coat after manufacturing to prevent oxidation
Temperature Range -40c ~165c
"Tight" tolerances off tool
Good mechanical strength
Typical Bonded Magnet Applications:
Sensors
Brushless DC Motors
Household Appliances
Compressor
General Bonded Magnet Applications:
Materials are isotropic and can be magnetized in any direction
Wide range of existing tool sizes are available in rings, discs and rectangles
Exsisting Multipole magnetizing fixtures for quick prototyping
Easily machined
Existing Multipole rings simplify assembly verse arc sepments
About us:
Ningbo ZhongYuan Magnet Co., Ltd. Was founded in 2008, as a professional manufacturer and exporter, we are specialized in designing and producing of rare earth magnet, especially for sintered and bonded NdFeB(Neodymium) magnets. Currently we mass produce N52, 50M, 48H, 45SH, 40UH, 38EH, 33AH and other grade of sintered NdFeB(Neodymium) magnet. They are widely used in Automobile, Wind Power, Servo and so on. Our factory is located in Ningbo, Where is the industrial bases of Ndfeb magnet.

With advanced processing and test equipment, The stablility, consistency and tolerance of our magnets can be well controled. Choose ZhongYuan Magnet you can experience more professional technical advice, fast quotation, ordered production plan, quality control and convenient mode of transportation. Which can support us to provide good products and timely delivery. Problem analysis in your position is always our service tenet.

If you have any interest or inquiries for Neodymium(NdFeB) magnet, you are welcomed to inquire here. We are sure you will be satisfied with our price and service.

There are many kinds of Glass Door Locks, but mainly two types which for glass cutting and no need glass cutting. The advantage of the glass lock is that the glass doesn't need to cut-out and also can keep safe better. So glass lock is more and more popular. And we JIANGYI company is specialized in manufacturing all kinds of glass hardware for more than 20 years. We persist to develop new models and use good materials to cope with the increasing variety need of domestic and foreign markets.

Specification

1. Material: Stainless Steel/ Zinc. Alloy

2. Finish: Mirror / Matt

3. Suitable for glass thickness: 6~12mm

4. Must be tempered glass 

Glass Door Lock

Glass Door Lock,Sliding Glass Door Lock,Locks For Glass Doors,Sliding Door Lock

Jiangyi Industrial Co., Ltd , http://www.cnjyhardware.com