Red brick ceramic

Red brick is a sintered building made of clay, shale, coal gangue, etc., which is pulverized, mixed and kneaded, and then formed by manual or mechanical pressing. After drying, it is fired at an oxidizing flame at a temperature of about 900 °C. Bricks. Also called clay bricks. The red brick technical label is generally from 75 to 100. Ordinary sintered bricks (red bricks) are also called standard bricks with a size of 240*115*53. (Units in millimeters) The color is red and sometimes dark black. Ordinary clay bricks have certain strength and durability, and have certain advantages of thermal insulation and sound insulation due to their porosity. It is therefore suitable for use as a wall material, but also for masonry columns, arches, chimneys, floors and foundations. Old buildings use it as a building material. Invented by the ancient Romans, many of the remaining classical buildings in Europe now have the shadow of red bricks on the roof and walls.

In ancient China, the brick-burning process was mature before the Warring States Period. However, because the hierarchical system could not burn red bricks, it was necessary to add some processes to become bricks after burning red bricks.

In the late Qing Dynasty and the Republic of China, the history of burning red bricks was only available to our people.

China's traditional brick making process is to close the whole kiln in the late stage of firing high temperature, so that the oxygen supply in the kiln is insufficient, and the iron ions in the brick are reduced from red ferric to green low-priced iron. . According to the research on brick homes, the performance of blue bricks in oxidation, hydration, and atmospheric erosion is obviously better than that of red bricks. The ancient Chinese "Qin brick Hanwa" can still be preserved for thousands of years. However, because the brick brick has a complicated firing process, high energy consumption, small output, high cost, and it is difficult to achieve automation and mechanized production. After the large-scale industrial brick making equipment such as wheel kiln and brick-extruding machinery came out, the red brick has been leaps and bounds. Development, while the bricks are still used in addition to individual antique buildings, they have basically withdrawn from the stage of history.

With the development of science and technology and the enhancement of people's awareness of environmental protection, new and unfired bricks are constantly coming out, but experts believe that red bricks are still the best performance and comfort wall materials. In the future, the status of red bricks for a long time is still difficult to replace.

Since the reform and opening up, China's red brick production has grown geometrically, but many small red brick factories have borrowed and burned bricks to indiscriminately, causing a large number of farmland to be destroyed. Therefore, since 1993, the state has begun to restrict and ban the destruction. The behavior of Tianzhu bricks is expressly banned from the production of clay solid bricks, restricting the production of clay hollow bricks, the so-called “forbidden viscosity limit” policy, while promoting and encouraging the production of red bricks from shale bricks and coal gangue mines.

Short Radius Elbow refers to  that  the radius of curvature is 1 times of the elbow pipe diameter,also referred to as 1D.

Elbow push hot forming process is the use of special elbow pushing machine, mandrel and the heating device, so that pushing pipe raw material to  forward movement in the mold set, be heated in motion, expanding and bending forming process. Elbow push hot deformation characteristics of tube diameter is determined according to the law of constant volume before and after deformation of the metal material, use smaller diameter than the diameter of the elbow, through mandrel to control the deformation process of the blank, to other parts of the compensation due to thinning of the diameter expands, thereby obtaining a uniform wall thickness of the elbow.

Product Name:Short Radius Elbow
Size:DN10-DN2500
Materials: A234 WBP-WP1-WP12-WP11, A403 WP 304-304L-316-316L, A402 WPL3-WPL 6,A860 WPHY 42-46-52-60-65-70,PG370,C20
Thickness: 2mm-100mm 
Standard:GB/ANSI/ GOST/ JIS/ DIN
Crafts: Butt, Push System, Simmer 
Connection: Welding 
Package: Wooden boxes,Wooden pallets,According to customer requirements.
Brand Name: HY 
Place of Origin: China (Mainland) 
Certification: ISO.UKS.SGS.BV 
Application: Chemical, Water, Oil and gas, Electricity
Short Radius Elbow

Short Radius Elbow

Short Radius Elbow,Short Radius,Stainless Steel Short Radius Elbow,Pipe Elbow Radius

CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , http://www.pipefitting-china.com

Posted on