How to choose and maintain wooden furniture

When you buy wood furniture on the market, you should generally take care of the overall size and layout of the living room to determine the style of the furniture and the color of the surface decoration. Then we must check the appearance quality of the furniture products and comprehensively evaluate them from the following ten aspects.

1. The functional size of the furniture should meet the requirements for use. For example, the middle clearance height of the desk is greater than 580 mm; the intermediate clearance is greater than 520 mm; the seat height of the chair is 420 or 440 mm; the width of the armchair is greater than 460 mm; the space of the wardrobe is greater than 1350 mm; The space of the short coat is more than 850 mm; the depth of the hanging space is greater than 500 mm.

2. The wood should be dried and the water content is below 12%. The wood that the insects are still eroding should not be used. The outer parts and the parts for storing the articles must not have resin capsules.

3. Wooden furniture should be firm in structure and the frame should not be loose. It is not allowed to break and break. Don't buy a "three-one furniture" that uses a saw to saw a chipboard, a nail and a paint. Don't buy furniture made with “three no” drawers that have no slots, no flaws, and no straps at the end.

4. The components of the wood-based panels used on the furniture shall be sealed at the same time, and the various accessories shall be installed with few pieces, missing nails and nails.

5. The surface of the plate (such as the door panel, countertop, etc.) should be flat and must not have obvious warpage. In general, when the diagonal length is greater than or equal to 1400 mm, the plate warpage allowable value is greater than or equal to 3 mm.

6. The door and drawer switch should be flexible. When the drawer is pulled out by two-thirds, the sag is less than or equal to 20 mm, and the swinging bottom is less than or equal to 15 mm.

7. Wooden furniture should have completeness and stability. When the two doors are opened 90 degrees, the hand can be gently pulled forward, and the cabinet can not be tilted forward automatically; the glass of the bookcase door should be edging. The mirror and dressing table are to be fitted with a back panel and the glass mirror is fixed with a bead.

8. When the panel is covered with thin wood and other materials, it is required to be tight and flat, and no glue, degumming or bubbling is allowed.

9. The surface of the furniture should be flat and bright, the color of the unit or set of products should be similar, and the paint film on the surface of the product should not be wrinkled, sticky or leaky. The interior of the product and other painted parts should be kept clean.

10. The purchased furniture should also pay attention to maintenance and maintenance. Avoid bumping and scratching during handling; before loading and unloading clothes, level the cabinet first, so that the cabinet doors are evenly divided and flexible to open; the skirts and feet of the furniture should not be collided with wet mats; Do not use chemical brightener to wipe the dust. After dusting off, use a dry, damp cloth to gently wipe off the gloss. Newly purchased furniture should not be exposed to the sun, let alone near the heater. Wood moisture content changes too much and causes furniture deformation.

Musk Xylene is a Synthetic Musk fragrance which mimics natural musk. 

It has been used as a perfume fixative in a wide variety of consumer products, and is still used in some cosmetics and fragrances.

Musk xylene was once the most widely used of the "nitro-musks", but its use has declined sharply since the mid-1980s due to safety and environmental concerns, and musk xylene is a useful example of the lowest level of such risks which need to be taken into account. 

27

Musk Xylol

Musk Xylol,Musk Xylenemusk Xylol ,Farwell Musk Xylol ,Musk Xylol Synthetic

Gan Su Original Flavor Co.,ltd , http://www.futureperfume.com

Posted on