å•¥ is inlaid bearing

Source: China Bearing Network Time: 2013-04-09

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

On the metal collision surface of the bearing base; open the orderly, fine-grained holes or grooves; insert the formed solid lubricant; form the inlaid bearing. Also use solid lubricant emulsion (such as PTFE emulsion) to write these holes or slots Cured.
It is characterized by high bearing capacity and long working life. Compared with sintered bearings; although its collision factor is higher, the wear rate is one order of magnitude lower than that of laminated bearings; it has higher service life and heat resistance. Compared with carbon graphite bearings; its wear rate is low.
The base metals used as inlaid bearings are: cast iron, stainless steel, tin bronze, brass and lead-bismuth alloys. Inlaid bearings are mostly made of solid lubricants with composite components; mainly graphite, PTFE and MoS2. The formula can be used as a mosaic with the same linear expansion coefficient as the matrix data; it can be used under the customary high temperature conditions; it can also be made into a mosaic that can accept low speed and heavy load, water resistance and chemical solvent resistance.

Recommend to friends comments close window

Bearing related knowledge

The effect of metal wear self-correcting skills on the bearing life of several common bearing damages
FAG's optimization skills for reloading bearings and fine parts
NSK high-speed fine spindle bearing function features analysis of rolling bearing condition monitoring and fault diagnosis practical skills

This article links to http://
Please indicate the bearing network http://

Previous: Bearing fault repair next edition: INA thin-walled bearings in the production of parts in the process of "key door critical inventory"

Pvc Foam Board

Pvc Foam Board,Aluminum Composite Panel,Curtain Wall,Fire Retardant & Fireproof Material

Fireproof ACP,High Gloss ACP Co., Lt d. , http://www.nbcompositepanel.com