| Home>Bearing knowledge>skf bearing long-term protection knowledge |
Skf bearing long life protection knowledge
Source: China Bearing Network Time: 2014-06-30
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1, skf bearing device skf bearing device can be correct; affects the accuracy, life, function. Therefore; depicting and assembling parts of the bearing device should be fully discussed. It is expected to be in accordance with the operating specifications of the device. as follows:
.1) remove bearing and bearing components,
.2) to view the dimensions and finishing conditions of the dry components,
.3) device,
.4) View after installing the bearing,
.5) Supply smoothing agent.
2. After alignment and alignment on the bearing unit, if the alignment is not carefully performed, the alignment can cause the bearing to suffer other loads, conflicts and oscillations. These can speed up the fatigue and reduce the service life of the bearing, and It can damage the service life of other machine parts. In addition, the added oscillations and conflicts can greatly increase energy consumption and premature failure risk.
3, the basic condition monitoring in the application time, often to monitor the fundamental external conditions of bearing operation, such as temperature, oscillation and noise measurement, etc. These regular views will find potential problems early and will avoid unexpected Intermittent representation of the machine; enabling production planning, progressive plant productivity and power.
4, smooth again in the operation process, skf bearing demand has the correct smooth again; complete its embodiment. The method of bearing smooth; divided into smooth grease and smooth oil. In order to make the bearing good function; first; choose the right Applying conditions and applying a sleek approach to intentions. If you only think about smoothness; the smoothness of the oil is dominant. But the grease is smooth and has the expertise to simplify the layout around the bearing.
5, remove the time when the skf bearing will reach its end of the application period, it should be replaced. Although the bearing can not be used again, but the original bearing is properly removed; replace the new bearing in time; use the new bearing The extension of the number of life can be a good boost. First, the use of the proper unloading method will help prevent damage to other machine components. Second, the skill of improper removal can be done to the operator. Form damage.
Recommend to friends comments close window
| Bearing related knowledge |
| Talking about angular touch ball bearings: five kinds of rolling bearings commonly used in machine tools NSK bearings in the professional use of pumps and compressors Summary of the NSK bearing rear code name (1) Linear bearing maintenance |
This article links to http://
Please indicate the bearing network http://
Previous: "FAG bearing application environment should pay attention to the matter" detailed analysis of the next series: rolling bearing defects have those
High quality hook and loop fastener. Provide double strong grip of mesh.
Self adhesive procedures: on the basis of standard tape and special tape, using the high temperature back-glue
fuse machine to make the glue melt on their back, then cover one layer of oiliness release paper.
The product is divided into 3 types: 1.normal adhesive , which is with low melting point, and applicable to use in the winter,
and low temperatured conditions, just common stickiness.
Velcro Tape,Strong Velcro Tape,Eco-Friendly Velcro Tape,Self-Adhesive Hook And Loop Tape
Hebei Charlotte Enterprise Co., Ltd. , https://www.cnscreening.com