In the hot and hot weather, the internal moisture of the wood is easily volatilized, causing the floor volume to shrink, resulting in widening of the gap at the floor joint, detachment of the tongue, cracking, etc., so in the hot summer, the floor should be maintained.
1, ventilation
In the summer, it is necessary to ventilate frequently, especially in rooms without people. The long-term vacant room is most likely to be arched and curled, so it must be regularly viewed and ventilated.
2, keep dry
Keep the floor dry and clean. Do not use the mop to drip the floor, or use alkaline water or soapy water to wipe the floor to avoid damaging the paint surface.
3, rainy day closing window
It is rainy in summer, and the room with wooden floors should be closed when there is no one to avoid unnecessary damage caused by rain and wet floors.
4, pay attention to moisture
Sauna weather, hot and humid, the floor is easy to arch, then the air conditioning dehumidification function should be turned on to reduce the humidity in the house and avoid arching. Try not to blow the air conditioner against the floor, and feel that the indoor drying can be properly humidified. You should pull out the curtains when you are out, and avoid direct sunlight on the floor.
5, timely repair
In summer, there are many rainy days, the climate is humid, the floor is easy to absorb moisture, and occasionally it will cause arching. It is found that the floor has arched and repaired in time, and don’t wait for the floor to be arched up and then repair it. At the same time, the arched part should not be stepped on as much as possible to avoid damage to the notch and cannot be completely recovered.
6. Regularly remove wax and re-wax
There are two ways to remove wax and wax. One is to use a sander for dry grinding. The corners that cannot be machined can be polished by hand with steel wool balls and then waxed. Second, wipe the floor with a damp cloth to remove wax. Clean with a mild detergent, rinse with clean water, dry with a dry mop, and then wax and glaze.
7, regular cleaning
Wood fiber is easy to break. It should be cleaned with a soft broom during daily cleaning. It can also be removed by a mop soaked with a rag or dust remover. General oil stains can be cleaned with a diluted neutral detergent, then rinsed with water and then wiped clean with a dry cloth.
Corrosion-Resistance Alloy,mainly refers to ordinary stainless steel resists atmosphere and sea water corrosion such as 300 series stainless steel including 304,316L, 317L etc.; comparatively strong corrosion resistance material including austenitic stainless steel 904L, 254SMOand Dual phase steel 2205,2507 etc.; Corrosion Resistant Alloy containing Cu 20 alloy; In comparison to non-metal corrosion resistant materials, corrosion-Resistance Alloy main refers to iron alloy (resistance to corrosion); nickel alloy (Ni-Cr alloy, Ni-Cr-Mo alloy, Ni-Cu alloy and other active metal.
Corrosion-Resistance Alloy
Corrosion-Resistance Alloy,Corrosion-Resistant Alloy Tube,Corrosion-Resistant Alloy Welding Wire,Corrosion-Resistant Nickel-Chromium Alloy
Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com