Fingerprint lock installation precautions and maintenance methods

Fingerprint lock is one of the most widely used types of smart locks. Fingerprint uniqueness makes fingerprint lock the favorite of all families and plays an irreplaceable role in protecting family safety. Then, let's briefly talk about the precautions and maintenance methods when installing the fingerprint lock.

Fingerprint lock installation precautions

1. Because the door opening method of the lock is not the same, the hole position of the mounting mold is not the same as the opening hole, so before the scribing, it must be based on the door opening method of the lock to surely install the holes on the mold to be the openings.

2. Lock front and rear body wires, sockets and plugs in the direction to ensure accurate convergence. Before installation, firstly confirm the installation height of the lock. After confirming the height, use the mounting mold to stick to the corresponding position, and then use a pencil to draw out the position to open the hole.

3, when the hole is installed, the flange of the mounting mold must be perpendicular to the door frame, otherwise it will cause the lock body to remain vertical to the door after installation. Under normal conditions, the lock cylinder needs to be installed in the middle of the door thickness. After the door frame has opened a good hole, the sawdust or other foreign matter in the hole must be cleared and cleaned to prevent the door from falling into the lock when the switch is vibrating.

4. Don't drop wood chips, iron filings, or other unusual objects from the lock body gap into the lock body, causing a short circuit in the electronic components or a jam of other components. Lock core installation: After the lock cylinder is installed in the mounting hole, the surface of the lock cylinder can not be higher than the outer surface of the door frame, preferably in the same plane.

5. The position of the pinch plate hole and the lock tongue must be corresponding to each other. If the pinch hole is not properly matched, the door may loosen or cannot be closed. At the same time, the insurance tongue cannot be locked into the hole of the pinch plate. The installation of the lock body: the screw must be in place, and there must be no gap between the lock body and the door. The connection of the wires: The connection of the wires must be ensured and the connection is stable, otherwise the door lock will not work properly.

Fingerprint lock maintenance method

1. Prohibit the panel from contacting with aggressive materials and avoid damaging the outer coating;

2. Do not hang objects on the handle. As the handle is a key part of opening and closing the door lock, its dexterity directly affects the use of the door lock;

3, can use a soft cloth to wipe the fingerprint collection window dust, due to the application of a long time, the appearance of dirt, may affect the normal use;

4, when collecting fingerprints, moderate finger strength, do not exert pressure;

5, do not pull the slide cover, open and close the use of force, accurate use of the slide.

The above is the precautions and maintenance methods for fingerprint lock installation. Consumers must pay attention when using the fingerprint lock, so as to extend the service life of the fingerprint lock.

Related browsing

A : The smart anti-theft lock can not be opened when you try these four methods

Recommended : Smart Home Voice Control Domestic Smart Home Products Agent Smart Home Products

WIFI Smart Lock (http://zns.znjj.tv)-Professional smart lock agent joining website, providing the industry's most comprehensive intelligent fingerprint password lock joining agent, smart lock product library, smart door lock price, smart lock brand , smart lock manufacturers Daquan information, welcome to browse online consulting.