EDM automatic programming system based on graphic exchange file method (2)

  1. Vertex rotation cumulative judgment

    Define the vertex direction of the vertices as the cross product of the two vectors adjacent to the vertex. For any flat pattern, the machining direction is related to the vortex direction of each vertex. If the number of vertices with positive rotation is more than the number of negative vertices, the machining direction is positive: vice versa. It can be verified that this method is valid for any flat graphic. However, when the number of vertices is large, the amount of calculation is large.
  2. Pole discrimination

    Define the pole of the polygon as the vertex with the smallest x coordinate. The machining closed loop direction can be obtained by judging the direction of the pole. Specifically, first select the pole and the adjacent two vectors in the double-linked list (if there are multiple poles, choose one) and calculate the cross product. The cross product is positive and the machining direction is positive (counterclockwise): otherwise the machining direction is negative (clockwise). The pole discrimination method is independent of the number of polygon vertices, so the amount of calculation is small.

3 Tool track calculation

Based on the previously determined machining direction, the tool path can be calculated. Dr work tool radius is set, unilateral discharge gap is d, the shift amount of the tool center ENGINEERING b = d + r.

    Table 1 Symbol selection when straight contour
    Part Processing direction a symbol
    outline negative 0≤,

    		Take "+"
    p/2≤, <3p/2 take"-"
    3p/2≤, ≤2p Take "+"
    positive 0≤,

    		take"-"
    p/2≤, <3p/2 Take "+"
    3p/2≤, ≤2p take"-"
    Inner contour negative 0≤,

    		take"-"
    p/2≤, <3p/2 Take "+"
    3p/2≤, ≤2p take"-"
    positive 0≤,

    		Take "+"
    p/2≤, <3p/2 take"-"
    3p/2≤, ≤2p Take "+"
    Table 2 Compensation for tools in arc profile
    Part Arc direction Tool path arc radius
    Inner contour Shunyuan Rb
    Reverse circle r+b
    outline Shunyuan r+b
    Reverse circle Rb
    Previous page next page

Hot Dip Galvanize Bolt

The anticorrosive life of hot-dip galvanized bolt is different according to the use environment. Under the ordinary environment, the standard hot-dip galvanized bolt can be maintained for more than 30 years without corrosion, but in urban or offshore areas, the rust prevention layer of hot-dip galvanized bolt can be maintained for 20 years without rust.

Hot dip galvanized bolt principle is simple to understand, excellent performance, it is lower than the cost of stainless steel bolt, but the strength is much higher than the stainless steel bolt.

The galvanized layer of hot dip galvanized bolt is closely attached to the steel, firmly combined, and will not fall off. It is very safe and reliable in the use process.

Hot Dip Galvanized Bolt,Hexagon Flange Bolt,High Strength 8.8 Bolt,Hardware Eye Bolt

Handan Changlan fasteners manufacturing ,.Co ltd , https://www.hdchanglanjgj.com

Posted on