For industrial and commercial applications, it is necessary to enhance the wear resistance of concrete floors. The density of the concrete surface is increased, which reduces dusting, increases the oil resistance of the city surface, and forms a high-density, easy-to-clean, anti-penetration ground. Construction with concrete floor, construction period is short. Low cost and good durability, reducing the cost of periodic coating or thickening of the surface.
Acceptance criteria for epoxy floor:
First, the surface properties:
1. When the ambient temperature is 25 °C, it should be 2-3 days after construction, that is, the hardness reaches about 80% of the completion of curing;
2, the surface can not appear sticky;
3, air bubbles: flat coating type, mortar type without bubbles, self-leveling allows 1 small bubble / 10 square meters;
4, good leveling, no knives, large-area interface is basically flat;
5, no floating color, uniform color, large-area interface allows for extremely inconspicuous color difference;
6, no coarse impurities, but allow the floating dust in the air to fall into the smallest defects caused;
7, the surface of the floor should be smooth and smooth, the gloss should meet the design requirements (high gloss ≥ 90, light ≥ 70, half light 50 ~ 70), flat coating type is light, water is semi-gloss ~ no light;
8, orange peel, mortar anti-slip surface effect should be very obvious.
China leading manufacturers and suppliers of Nonwoven Wallpaper:
Wallpaper Material: Non-woven
Wallpaper Size: 0.53*10m, 0.53*9.5m
Wallpaper Style: 3D, Damask, Classic, Modern, Flowers, Bricks and Stone, Wood wallpaper etc.
Wallpaper Weight: 100-200g/sqm
Non-Woven Wallpaper,Project Plain Nonwoven,New Morden Design Wallpapers,53Cm Plain Wallpaper
SHAOXING VIGOUR DECORATION MATERIAL CO.,LTD , https://www.vigourwallpaper.com