SKF entity insists on depicting

Source: Bearing network time: 2013-11-24

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The solid frame for SKF bearings is made of brass, steel, light alloy, nylon or fiber reinforced phenolic resin. Depending on the bearing depiction; SKF entities adhere to the following different depictions:
Two-piece machined riveting bracket (a)
Double-piece machined riveting bracket (b)
Single-chip window-cutting frame (c)
Machined double buckle hold frame (d)
Nylon window type shelf (e)
Nylon card holder (f)
Single chip fiber-reinforced phenolic resin adherence frame (g)
Machined metal holders generally accept higher speeds; additional movements are added in addition to pure tumbling; especially in high acceleration situations; it is necessary to use such holders. It is necessary to adopt appropriate methods (eg oil Lubrication); to ensure that the support frame guides the external appearance of the bearing and the internal supply of the bearing.
SKF machine-cutting is controlled by a bearing component in the following radial direction:
Roller (a)
Inner ring shoulder (b)
Outer ring shoulder (c)
Therefore there is radial guidance.
The solid nylon self-supporting frame is characterized by an excellent connection between strength and elasticity. Nylon has a smooth sliding function with a lubricated steel surface; it is lubricated with a roll-over touch holder; there is little conflict; therefore, the heat inside the bearing The wear is very low. The low-density data means that the inertia of the frame is very small. The nylon adheres to the frame with excellent running characteristics in the absence of lubricant; it promises that the SKF bearing will continue to run for a while; Dead and further damage.

Recommend to friends comments close window

Bearing related knowledge

Fan bearing fault causes and sweeping methods for you to solve problems
Oscillating analysis of rolling bearing fault diagnosis Anatomy of needle roller bearing layout and characteristics How to protect the pump bearing?
Angle contact ball bearing sealing method

This article links to http://
Please indicate China Bearing Network http://

Previous:The viscosity coefficient of smooth oil Next edit: Skill analysis: the use of bearings

Integrated Solar Street Light

Integrated Solar Street Light,Solar Street Light,Solar Garden Lamp Base,Integrated Solar Light

Jiamei Energy(hongkong) Limited , https://www.jiameilight.com