Emery wear-resistant floor is also called inorganic aggregate wear-resistant floor, wear-resistant floor, wear-resistant floor, hardened floor, hardened floor, hard floor, hard floor. The wear-resistant flooring material is a ready-mixed, on-site, dry-sand ground hardener in the factory. Mainly consists of high-strength cement, inorganic wear-resistant aggregate, pigment powder (cement color no), additives and other components. The aggregate is sand-like with an average particle size of 1.5mm, which accounts for about 60% of the total; the cement is a treated high-grade cement. Besides the cement color, there are various colors such as red, yellow, green and gray. select. The hardener aggregate composition is natural ore. Department of rust-free non-metallic aggregate, the hardness of Moh's above 8 degrees. Except natural ore aggregates, the weight of other cements, pigments, etc. does not exceed 25% of the total weight.
This product is directly applied to the surface of concrete or cement mortar in the initial setting stage. After being smoothed, it forms a hard, wear-resistant, dust-free and beautiful hardened floor. Mainly have the following characteristics:
advantage:
1, the color is optional, the surface is dense, easy to dust, easy to clean
2. It is a substitute for traditional industrial ground terrazzo.
3, synchronous construction with concrete, can be quickly put into use;
4, low cost, high cost performance. long lasting.
5, wear resistance, impact resistance, excellent pressure resistance;
Disadvantages:
1. Color selection has certain limitations: Common colors are only cement primary colors, gray, green, red, etc.
2, some low-quality color (such as green) wear-resistant floor, will fade in a short time.
3. Even if it is a color-resistant floor, its color cannot be as pure and saturated as an epoxy floor;
4. Poor permeability resistance: The wear-resistant floor is actually a kind of high-strength concrete. Its anti-permeability is far less than the epoxy floor. For some workshops that often have oil stains, such as machining workshops, oil pollution is very easy. Infiltrated into the interior of the floor, causing incomplete cleaning.
5, can not resist the corrosion of chemicals: Inorganic silicate-based chemical composition, can easily be acid, alkali corrosion.
6, the surface finish is far less than the epoxy floor, especially the poor quality of the wear-resistant floor may also be ash, it does not apply to the cleanliness requirements of the floor.
Application scope:
The wear-resistant floor is suitable for all types of industrial and civil applications that need to withstand the frequent travel of vehicles, often with heavy impact, often with sharp hardening, non-corrosive chemicals, low cleanliness requirements, and low aesthetic requirements. Commercial floor.
This product is directly applied to the surface of concrete or cement mortar in the initial setting stage. After being smoothed, it forms a hard, wear-resistant, dust-free and beautiful hardened floor. Mainly have the following characteristics:
advantage:
1, the color is optional, the surface is dense, easy to dust, easy to clean
2. It is a substitute for traditional industrial ground terrazzo.
3, synchronous construction with concrete, can be quickly put into use;
4, low cost, high cost performance. long lasting.
5, wear resistance, impact resistance, excellent pressure resistance;
Disadvantages:
1. Color selection has certain limitations: Common colors are only cement primary colors, gray, green, red, etc.
2, some low-quality color (such as green) wear-resistant floor, will fade in a short time.
3. Even if it is a color-resistant floor, its color cannot be as pure and saturated as an epoxy floor;
4. Poor permeability resistance: The wear-resistant floor is actually a kind of high-strength concrete. Its anti-permeability is far less than the epoxy floor. For some workshops that often have oil stains, such as machining workshops, oil pollution is very easy. Infiltrated into the interior of the floor, causing incomplete cleaning.
5, can not resist the corrosion of chemicals: Inorganic silicate-based chemical composition, can easily be acid, alkali corrosion.
6, the surface finish is far less than the epoxy floor, especially the poor quality of the wear-resistant floor may also be ash, it does not apply to the cleanliness requirements of the floor.
Application scope:
The wear-resistant floor is suitable for all types of industrial and civil applications that need to withstand the frequent travel of vehicles, often with heavy impact, often with sharp hardening, non-corrosive chemicals, low cleanliness requirements, and low aesthetic requirements. Commercial floor.
Aluminium Coil,Coated Aluminium Coil,Aluminium Mecical Cap
Ruixiang Aluminum Industry Co., Ltd. , http://www.hnaluminumsheet.com