At the time of purchase, it is necessary to make a specific calculation to know the purchase amount. The first step in buying heating is to match the area of ​​the heating house, and since the heat dissipation of different brands of heating is not nearly the same, scientific calculations should be performed before heating. Here are three methods for heating calculations:
A calculation area; second calculation wattage (W); three calculations.
1. Calculate the area: Calculate the area of ​​your bedroom, living room, bathroom, kitchen, etc., and use them as the basic data for further calculation.
2. Calculating the wattage (W): This process is relatively complicated. The following is a brief summary of the reference data for a group of residential building heat indicators for civil heating. General family homes can be calculated at 45 to 70 W per square meter. When purchasing heating, "the area of ​​the room x watts per square meter = the amount of heat that the room needs." In general, the heating is marked with "W". Due to the large differences in real life changes, factors such as buildings or bungalows, top or bottom floors, end or middle, northern or southern rooms, urban or outdoor areas, and wall insulation should be taken into consideration when estimating changes in real life. There is a simple way, after calculating the number of radiators can be appropriate, when plus 10 ~ 20%, as a rich amount, so as not to heat the heat enough.
3, count the number of tablets: In fact, after calculating the wattage can be converted into the number of heating and then calculate the number of groups, the actual heating is not all can be split combination, especially bathroom heating, generally are the whole Most of the modeling, consumers choose their applicable style based on area.
Zhongyu bathroom wardrobe brand heating heating housing residential room overall bathroom
With the constant improvement of the people environmental protection consciousness, not only requires metope paint, waterborne implementation also requires floor waterborne coating system gradually realize to reduce the negative effect on the environment, but the wear resistance of floor coating system is conventional water-based coating cannot be achieved. To thoroughly solve the technical problems, the company USES advanced technology research and development center, adopt special special water-based epoxy resin and Curing Agent, with special processing technology and the emulsification technology, has developed an excellent environmental performance, has high abrasive resistance and solvent resistance of the waterborne epoxy floor coating system. Waterproof breathable function of the system greatly improves the system applicability of wet subgrade, is all not do the waterproof layer, damp, but at the same time, and have high cleanliness requirements, need to coating epoxy floor coating system places ideal choice.
Waterborne Epoxy Resin Floor,Yellow Waterborne Epoxy Resin Floor,Peacock Blue Waterborne Epoxy Resin Floor,Medium Gray Waterborne Epoxy Resin Floor
Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com