First, look. See if there is a quality system certification; see whether the certificate is standardized; see if there is a factory name, site, inspection seal, and production date; see whether the trademark is printed on the wire, specifications, voltage, etc. Also look at the cross section of the wire copper core, superior product copper color bright, soft color, otherwise it is defective.
Second, try. It is advisable that a wire head be repeatedly bent by hand, and that any product that has soft hand feeling, good fatigue resistance, plastic or rubber feel elasticity, and no crack on the wire insulation body is superior.
Third, weigh. Good quality wires are generally within the specified weight range. Such as the commonly used cross-sectional area of ​​1.5mm2 plastic insulated single strand copper wire, weight per 100m of 1.8 ~ 1.9kg; 2.5mm2 plastic insulated single strand copper wire, weight per 100m 3 ~ 3.1kg; 4.0mm2 plastic Insulated single-stranded copper wire weight is 4.4-4.6kg per 100m. Poor quality wires have insufficient weight or are either of insufficient length or have too many impurities in the wire copper core.
Fourth, than the price. Because of the low cost of making fake and shoddy wires, when selling, traders often sell at a low price for good value, which makes people fooled.
Fifth, look at copper. Qualified copper core wire copper core should be purple, shiny and soft to the touch. The shoddy copper core copper core is purple-black, yellowish or white, with many impurities, poor mechanical strength, and poor toughness. It will break when it is hardened, and the wire is often broken. When checking, you just strip the wire 2cm, and then use a piece of white paper on the copper core to make a brief look. If there is black material on the white paper, the copper core contains more impurities.
Product introduction
HHCMS-240 type Carbon Molecular Sieve
HHCMS-240 is a new kind of non-polar adsorbent. It is designed to extract nitrogen-rich gas from the air. It is suitable for separating nitrogen from the air.
The most notable features of the carbon molecular sieve are high gas-producing efficiency and low waste, especially nitrogen with a purity higher than 99.9%.
It is widely used in large air separation and sheet making equipment, and the application field covers the high-end aspects such as the storage and transportation of crude oil in yibi ships.
Project parameters
The diameter of:1.0-1.3 1.3-1.5
Packing density:≥680-700kg/m³
The intensity of particle:≥95
Compressive strength abrasion:≤1%
The moisture content:≤0.5%
Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel
The adsorption time of test condition was 58s with an average pressure of 1-2s
|
Adsorption pressure |
Nitrogen purity (%) |
Yield (Nm3/ h.t.) |
Nitrogen recovery rate |
|
0.8MPa |
99.99 |
95 |
24 |
|
99.9 |
160 |
29 |
|
|
99.5 |
240 |
35 |
|
|
99 |
320 |
42 |
|
|
98 |
400 |
43 |
|
|
97 |
490 |
48 |
|
|
96 |
560 |
51 |
|
|
95 |
620 |
55 |
|
|
0.6MPa |
99.99 |
75 |
27 |
|
99.9 |
130 |
30 |
|
|
99.5 |
190 |
37 |
|
|
99 |
260 |
42 |
|
|
98 |
320 |
44 |
|
|
97 |
390 |
50 |
|
|
96 |
445 |
52 |
|
|
95 |
500 |
56 |
Pay attention to
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;
Molecular Sieves Hhcms-240,Molecular Sieves For Drying Solvents,Molecular Sieve Regeneration Process,Carbon Molecular Sieves Types
Zhejiang Changxing Haihua Chemical Co.,Ltd. , http://www.zjcxhhcms.com