Overall cabinet maintenance skills

Many consumers only pay attention to the quality of the whole cabinets sold. They don't know much about the post-maintenance after the whole cabinet installation. Xiaobian puts forward some common sense for the maintenance of the whole cabinets. The overall cabinet maintenance skills are for reference. With.

Whole cabinet countertop maintenance

No matter which material is made, the whole cabinet countertop is afraid of high temperature erosion. Therefore, in use, care should be taken to avoid direct contact between the hot pot and the hot water bottle. It is best to put it on the pot rack. In operation, try to avoid hitting the table with sharp objects to avoid scratches. In addition, chemical substances have an erosive effect on the countertops of many materials, so the countertops should be cleaned immediately after use. For example, if the stainless steel countertop is stained with salt, it may rust. Therefore, you should also pay attention to avoid placing soy sauce bottles and other items directly on the countertop; artificial panel cabinets should avoid water stains staying on the countertop for a long time.

The cleaning of the daily countertops of the whole cabinet also has an impact on the service life of the whole cabinet. Therefore, the cabinets for different materials provide consumers with the following suggestions: artificial stone and stainless steel cabinets should not be washed with hard scouring pad, steel ball, chemical wipe or steel brush. Use soft towel and soft scouring pad to bring water. Wipe or wipe with a brightener, otherwise it will cause scratches or erosion. Fireproof board cabinets can be cleaned with a nylon or nylon ball using a household cleaner, then wipe with a damp cloth. Natural stone countertops should be soft scouring pad, not toluene detergent, otherwise it is difficult to remove white spots.

Maintenance of the whole cabinet door panel

For solid wood or solid wood veneer cabinet door panels, in order to avoid the cabinet door panel cracking, you can choose Bili beads and other maintenance cleaning wax to wipe during maintenance. However, the use of products containing nitrate or synthetic resin should also be avoided, otherwise the cabinet will be harmed. The best way to clean is to wipe with a damp leather cloth and dry with a dry leather cloth. In the case where detergents must be used, a mild cleaning product must be selected, then wiped with water and wiped dry. For the paint door panel, when cleaning the paint cabinet door panel, wipe it gently with a clean damp cloth, then immediately dry it with a soft and clean cloth to avoid leaving water marks and not beautiful. If detergents must be used, it is best to use original or professional cleaning products, avoid using detergents containing nitrate or synthetic resin, then wipe them with a damp cloth and dry them with a soft cloth. The maintenance of the cabinet of the whole cabinet has a great influence on the whole cabinet.

Overall cabinet maintenance precautions:

1. The carrying capacity of the hanging cabinet is generally not the following cabinets, so it is suitable to place relatively light items in the hanging cabinet. For example, the weights such as seasoning tanks and glass cups are best placed in the lower cabinet.

2, the utensils should be cleaned and then placed in the cabinet, in particular, the utensils should be wiped dry.

3. The hardware in the cabinet is wiped with a dry cloth to prevent water droplets from remaining on the surface to cause water marks. The sink of the cooking table can be used to hold the internal filter box with filaments to prevent the chips and fine debris from blocking the water pipes.  

1.Quality pass Germany TUV testing. Tuv testing is third safety certificate company,.more authoritative.

2. This system welding machine use Surface Mount System to install electron component and the main PCB board is single .So this system could make the machine`s quality is very stable. Rise the quality consistency.   

.

3.The power tube of the switch use germany infineon only.The PCB board thickness size is 2.7mm. 

4.The insert component use Taiwan KSS.

5.The aluminum web wing is more bigger and weighter than normal.

6.Passed EMC certificate and get the EMC certificate. According to IEC 60974-1 standard.

7. Our machine`s input voltage is auto change between 85V-240V.So could work under any voltage. Like japan 110V or America 110V AC. Like European 220V-240V AC. Like Brazilian 110V/220V together AC.

8.CEL. Could weld Cellulose electrode easy.

9. Welcome any customer to make your design. We have advanced exploit troop.

10.PFC (Power Factor Correction is more than 98%. So according to energy conversation ,environmental protection and low-carbon.

11. VRD make no-load output voltage under 24±2V, But when arc strike twinkling could rise working output voltage.So this technique could have more physical protection.


Welding Tools

industrial Welding Machine,Pigeon Welding Machine,Family Quality Welding Machine

YongKang WALMA Tools CO., LTD. , http://www.walmatools.com

Posted on