QBL-25 aluminum pneumatic diaphragm pump uses compressed air as the driving force, the gas-liquid two-phase isolation, the use of static sealing structure, with or without leakage and lubrication advantages, but in the course of some attention Matters worth our attention, here to introduce QBL-25 Aluminum Pneumatic Diaphragm Pump precautions are there? 1. When conveying fluid that is easy to sediment and easy to "freeze-solidify", when the pump is inactive for a period of time, be sure to flush the inside and outside of the pump with a suitable solvent before deactivation to avoid blockage damage. 2. If the pump is to be stopped for a few hours during operation, cut off the compressed air. 3. The pump flow can be adjusted by adjusting the pressure and flow of compressed air from the pneumatic diaphragm pump. You can also adjust the feed flow to control, please do not use the hose and the pipe diameter is too small, so as not to feed pipe suction resistance obstruct blockage feed. 4. It is recommended to install a shut-off valve on the compressed air intake of the drive pump when pumping positive pressure. 5. Please install the pump firmly, so as to avoid damaging the pump when working. In order to more reasonable use of QBL-25 aluminum pneumatic diaphragm pumps, thereby reducing the chances of failure and prolonging its life, we pay more attention to the use of QBL-25 aluminum alloy pneumatic diaphragm pump used in some Notes. Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Lindj (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)
Trisodium Phosphate,Trisodium Phosphate Anhydrous,Trisodium Phosphate Dodecahydrate,Trisodium Phosphate Anhydrous Food Additive
Shaanxi United Xingchuang International Co., Ltd. , https://www.lxcgj.com