Nowadays, the switches and sockets in modern buildings are all close to humanity, which brings convenience to the practicality of life. There are also many people who directly operate the equipment and pay attention to ergonomic design. The size of the installation directly affects the ease of use and comfort of people. In addition, it will also affect the visual appearance, so these dimensions must be remembered in the transformation of the water circuit. If there is any mistake, it will bring unnecessary trouble. So, what are the dimensions of home-installed hydropower installations ?
Home installation water and electricity installation size
1. The height of the power switch from the ground is generally between 120cm and 135cm (usually the switch height is as high as the shoulder of an adult);
2. Bedroom headboard: distance from the bed: 10cm - 15cm, height from the ground: 70cm - 80cm; (bedroom TV height: 120cm; height of living room TV: 80cm - 90cm);
3, kitchen panels must be set in accordance with the requirements of the cabinet drawings, and pay attention to fumes; under normal circumstances: stove above the panel 120cm from the floor, the cabinet inside the panel 65cm from the floor, hood panel off the ground 2100cm;
4. The bathroom socket is 130cm away from the ground, plus waterproof box or waterproof socket;
5, water heater angle valve height 130cm -140cm; toilet toilet angle valve height 30cm; shower valve hole center distance of 15cm, height 110cm-120cm above the ground; mop pool nozzle height above 65cm - 75cm, no When the mop pool is properly lowered, the water tap of the washing machine is 100cm to 110cm above the ground.
One, bedroom:
1, bedside dual control, on the nightstand, face off the ground, with the socket flat 850mm.
2, air conditioning hook socket Original building design 1800 after the transformation of 2400mm.
3, under the TV cabinet socket 300mm. Hang the TV central socket 1100mm.
4, in the computer and other desktop socket 300mm.
Second, the bathroom
1: The height of the mirror light is 1850mm. The socket and switch are flat 1300mm.
3: Washing machine socket 1350mm. : Toilet seat 350mm.
4: Electric water heater socket 1800-2000mm, to consider where the electric water heater is placed.
Third, the kitchen:
Kitchen appliances include: range hoods: gas water heaters, refrigerators, microwave ovens, rice cookers, induction cookers, juicers, electric kettles, electric cake pans. Disinfection cabinets, dishwashers, kitchen pouches, small ovens, garbage disposal , Such as sockets, generally use five-hole, with ground socket.
1: The kitchen all the table sockets are usually installed in four places from 1250 to 1300mm
2, cabinet lights:: ready to install the light behind the cupboard, about 1700mm from the ground, thrown out of the wire, you can receive the lamp under the hanging cabinet. Switch 1300mm is flush with the socket, pay attention to the insulation of the connector part.
3. Chinese-style range hoods are generally about 2150mm from the ground, about 250mm from the middle of the range hood, and the exhaust duct is at the left, and the socket is placed rightward. When the exhaust duct is on the right, the socket is left to put. Smoke pipes will not block the outlet.
4, gas water heater socket is generally from the height of 2300mm, 1800mm low, around the middle of the gas stove to take 250mm, outlet must consider leaving the smoking road.
5, refrigerator socket is best placed on both sides of the refrigerator from the ground to insert 1300mm, low plug 500mm.
6. Garbage Disposer: Put the cabinet in the adjacent cabinet of the sink, about 500mm from the ground, (the garbage disposal must be reserved at the 1300mm on the tabletop). The hand is easily accessible and convenient to operate.
Second, note:
1. It is not suitable to slot the jumper pipe on the ground to avoid the pipeline area.
2, should not be free to punch in the ground to fix the pipeline, to avoid the pipeline area
3, open the cassette when the housing reinforcement must avoid, can move down or even change the position, prohibiting broken ribs.
4, can not open long transverse trough: the load-bearing wall is easy to damage the structure, light wall due to the force of the upper and lower three sides, after the broken tendon will cause trouble.
5, decoration and transformation of wire and pipe should not go inside the plaster line, easy to cause dead bent, dead line.
6, PVC pipe diameter less than 25 bend pipe bender, can not add bends elbow; circuit is not a show, bends to avoid bending at right angles.
7, the line tube is first arranged, fixed, and then threaded and wire.
Editor's summary: The relevant information about home-installed hydropower installation dimensions was introduced here for everyone. Hydro-electricity renovation is the key to the entire renovation process. The owner needs to spend a lot of thought and hope this article helps everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Hydropower installation
CBN inserts is especially for sharpening and rough grinding of tungsten, tungsten and molybdenum and other high speed steels,
and super-finishing of difficult-to-machine heat-resistant steel workpieces and grinding of other steel quenching tools
CBN Insert,CBN Welding Tips,PCBN Insert Vendor,CBN Cutting Tools
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtools.com