Wear pump is a breakthrough in science and technology research and development, with the most excellent wear resistance, impact resistance (especially the impact of low-blast resistance), creep resistance (resistance to environmental stress cracking) And excellent corrosion resistance characteristics. No matter how good the instrument, do not pay attention to maintenance, or not, effective maintenance can extend the service life of the instrument, to avoid instrument failure, the following let Xiaobian to introduce wear-resistant slurry pump operation in the maintenance of it. Wear-Resistant Slurry Pumps Operational Maintenance Introduction Wear-Resistant Slurry Pumps Operational Maintenance 1. Water lines must be highly sealed. 2. Prohibit long-term operation of pump in cavitation. 3. Prohibit the pump running in the flow, the motor over-current long-term operation. 4. Regular check pump operation, the motor over-current long-term operation. 5. The pump should have someone in charge of the operation, in order to avoid accidents. 6. The pump should operate for 500 hours of running time for refueling. Motor power is greater than 11KW with a refueling device, high pressure gun can be injected directly to ensure excellent bearing lubrication. 7. Long-term operation of the pump, due to mechanical wear, so that the unit noise and vibration increases, the parking should be checked, if necessary, replace the vulnerable parts and bearings, unit overhaul period is generally one year. Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Gogoing (QQ / wechat:) starting: http://beng.liuti.cn/ (service hotline:)
cation exchange resin, anion exchange resin, The Preparation of Pure Water
YIBIN PERFEC INTERNATIONAL TRADE CO.,LTD , https://www.yibinbofei.com