Curtain wall decorative aluminum veneer application in the industry

The ancients said that it was a matter of courtesy and knowledge and courtesy. When the material life is satisfied, people will think about deeper issues. Since the beginning of reform and opening up, with the rapid economic development and environmental pollution, haze and other issues, people have become more and more aware of the harm caused by over-acquisition of the natural environment. Due to its recyclability, aluminum alloy materials are increasingly favored by consumers.

With the improvement of people's consumption concept, few people have simply pursued the appearance of being beautiful and equipped to show it to others. More consumers are seeking environmental protection and health. As the property of the house, the time spent by people in the house is the longest, so the environmental health of the dwelling has received more and more attention. The environmental protection of the decoration is mainly reflected in the environmental protection of the material, followed by the environmental protection of the construction, and the environmental protection of the design. In fact, environmental protection is a material. In the design of aluminum alloy plates, our homes are more environmentally friendly.

Market Prospects of Aluminum Veneer in the Decorative Industry:

Aluminum veneer is one of the fastest-growing building decoration materials in recent years, with an average annual increase rate of over 50%. China introduced the first production line in the early 1990s. In a short span of 10 years, China has become the world’s largest producer and consumer of aluminum veneer. After more than 10 years of market development and development, the aluminum veneer industry has gradually matured and is increasingly used in the interior and exterior decoration of large-scale projects, landmark buildings and high-grade commercial residential buildings, showing broad prospects for development.

The quality requirements of aluminum veneer in the application of decorative industry:

Curtain wall aluminum veneer has much stricter dimensional deviation than common civil strip. At the same time, there is no requirement for verticality in the standard of ordinary aluminum strip, but strict requirements are imposed on the curtain wall aluminum plate, and the allowable width of the plate width is +3~0. Allowable length deviation +6~0. The curtain wall aluminum plates in industrialized countries are mostly 5754 and 5052 alloys. Their mechanical performance requirements are: allowable load strength ≥99N/m?, tensile strength Rm220N/m?~260N/m?, yield strength Rpo.2≥N/ m?, modulus of elasticity E ? 7000 N/m?. The surface quality of the curtain wall plate is also very strict, no roller printing, indentation, scratches, etc. are allowed.

Mingtai Aluminum, the domestic large-scale aluminum processing company, and the processing quality of Mingtai Aluminum 5052 aluminum alloy plate have been recognized by the market. Henan Mingtai Aluminum Industry is the backbone of the 5754 and 5052 aluminum plates on the market, and is also a large-scale manufacturer of large-scale production. .

Market price of aluminum veneer in the application of decorative industry:

In previous years, due to fewer domestic hot rolling production lines, there were few manufacturers capable of producing 5754 and 5052 aluminum alloy sheets, and no scale production was formed. Therefore, the 5754 and 5052 aluminum alloys on the market have been in short supply. Since then, Henan Mingtai's “1+4” hot-rolled production went into operation, breaking the market monopoly. Mingtai Aluminum's 5052 aluminum alloy plate quickly occupied the market with fast delivery, excellent quality, and large scale. At this time, the processing fee for aluminum plates of 5754 and 5052 is still around 10,000 yuan. Later, with the rapid development of domestic aluminum processing, intensified competition in the industry, market demand saturation and other factors, domestic aluminum companies began to compete to fight the "price war", and spread across many aluminum companies in northern and southern, has become increasingly fierce. The price of 5052 aluminum alloy sheet has dropped from around 10,000 yuan to around 4,000. In 2015, there are even manufacturers with more than 3,000 processing fees viciously competing in the 5052 aluminum sheet market. In short, the overall quotation on the market varies greatly, and the quality of products varies greatly.

When paying attention to a few points in the procurement, it is still possible to purchase quality reliable 5754 and 5052 aluminum alloy plates. For example, in terms of suppliers, we select top-ranking manufacturers with strong capabilities and large-scale production for consultation. In terms of price, the local aluminum manufacturers and other provinces have made a lot of comparisons. In terms of quality, they have examined the factory's production equipment and technological level.