Luminaires are indispensable building materials in homes. Luminaires not only bring people light, they also have a decorative effect. Therefore, many people will make minor mistakes in the use and layout of lamps, leading to problems such as being unable to use them. The following small series introduces lighting installation procedures and lighting installation techniques for everyone.
Lighting installation process
1, lighting inspection
Check the fittings of the lamps and lanterns to see if the manufacturer's relevant documents and technologies are complete. Look at the appearance of the lamps for damage, deformation, metal shedding, and corrosion.
2. Assembling lamps
The lamp parts are integrated into one body. The threading length of the lamp should be appropriate. For the extra thread ends, the thread should be separated from the thread and the zero line should be distinguished and the line should be straightened out.
3, lighting installation
Keep the power cord of the lamp, then cut off the remaining thread, peel the thread, and then install the lamp holder on the terminal box with screws.
4, power test run
After the installation is complete, turn on the power and check for power.
Lighting installation tips
1, lighting installation, it is best to install sub-control switch, this can save a lot of trouble. If there is only one master switch, several lights are turned on and off, so that other lights cannot be controlled, which is very troublesome.
2. The lamp is preferably set to be adjustable so that when the light is dim or dazzling, it can be adjusted to make people feel more comfortable.
3, the light color is the best soft, to be consistent with the color of the room.
4, for the kitchen lighting, it is best to install a few more, to form a multi-level lighting system.
5. If the space is high enough, a transparent or translucent chandelier can be installed as a light source. This will not only provide lighting but also a decorative effect.
6, the lighting installation should be solid, when the installation is complete, you can use your hand to see if it is firm, the bottom cover of the lamp should be close to the ceiling, can not shake.
Editor's summary: About the lighting installation process and lighting installation techniques introduced here, I hope to be helpful to everyone, want to learn more relevant knowledge can focus on this site information.
Lighting installation
Brandt 4' × 5' Shaker Screen
Replacement Hook Strip Soft Screens for Brandt 4' × 5' / B40 Shakers
Replacement Brandt 4' × 5' shaker screen is a kind of hook strip soft shaker screen. It is made of 304 stainless steel wire mesh cloth, designed with 2–4 layers composite bonded construction. Without steel backing plate, it offers maximum non-blanked area but increased fluid capacity. Bottom layer is made of coarse stainless steel wire mesh. It can supplies sieving action and serves as a support plate.
Technical Parameter
- Mesh Material: stainless steel 304/316/316 L.
- Frame Material: Q235 steel.
- Screen Type: XL, XR, MG.
- API RP 13C Designation: API 120 – API 325.
- Suitable Environment: water-based.
- Package: packed in paper carton, shipped by wooden case.
Adaptable Shale Shaker Model
SJ-Brandt 4' × 5' shaker screen are used as the substitute screen for
- Brandt 4' × 5' / B40 shale shaker
Competitive Advantage
- XL and XR mesh offer fine solids removal.
- Reduce requirement for mud dilution and treatment.
- Easy to install without any tools.
- Manufactured according to the API RP 13C (ISO 13501).
- Scientific & reasonable cost control system for competitive price.
- Adequate inventory in the shortest time to meet customers' demand.
Remarks:
Brandt 4' × 5', B40, are marks of Varco I/P, Inc.
ShengJia only produces the replacement screens but not original from Brandt.
Brandt 4'X5' Shaker Screen,Brandt 4'X5' Shale Shaker Screen,Brandt 4'X5' Oil Shale Shaker Screen ,Brandt Shakers
Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com