Curtains are inseparable from every family. When we choose curtains, everyone will not forget the choice of curtain rods. We need to install it after we choose it, but because many people don't understand it, they don't know how to install it. So we all know what curtain rod installation requires attention to it? Xiao Bian today's look just like everyone curtain rod installation method and installation point of it!
What are the installation methods for curtain rods?
1. The first is to install the top seat. After the position of the curtain rod is determined, drill the electric drill. After drilling the hole, fix the four top seats with the expansion screw (if the length of the rod is larger than the conventional size, adjust the length accordingly).
2, followed by the installation of the corner. The corner of the curtain rod can be installed on the top of the balcony or on the top of the wall. The corner is 50--70cm away from the movable top. It must form a triangle (45 degree angle) in the middle of the movable top seat, and maintain the same vertical line with the position of the rocker. .
3. Put on the wire of the curtain rod. A set of curtain rods contains two steel wires. First, one is taken out. First, one end of the steel wire passes through the bearing wire groove of the corner, and then passes through the movable wheel bearing wire groove of the movable end seat, and then passes through the fixed end top seat. The bearing wire groove makes the wire perpendicular to the ground, and then the top cover is inserted from the wire to catch the top cover. The same is true of the other end of the wire. The other wire is installed in the same way as the first one.
4. Finally, the curtain rod is fixed. At the end of each wire, wear a ball and tie it in the ball; then pull the ball to the top seat, then pull the wire from the corner position, just into a double-strand wire, stuck in the hand One side of the shaker; relax the wire in the hand crank, lower the drop ball, pass the curtain rod through the drop ball, then screw it in the hole of the drop ball, pin the screw; finally at the ends of the curtain rod Plug on the head.
Curtain rod installation points:
1, the price increase, but the quality is declining, especially the affordable housing and the construction of the house, some roof tilted about 10cm, the floor unevenness of the paved floor tiles is 5cm, the wall presents a ladder shape. Therefore, it is best to use a level and a horizontal tube when installing the curtain rod.
2, in order to show the beauty of the exposed curtain rod, then you must pay attention to the top of the room and the height of the window, to avoid the feeling of depression and suffocation. When installing on the wall, that is, the wall is installed, the pole and the ceiling should be around 6cm to 12cm. When installed on the roof and ceiling, which is referred to as the top security, the Roman pole should be about 6cm to 10cm away from the wall to prevent the curtain from opening and closing, rubbing the wall surface and staining the curtain fabric.
3. During the installation process, the window frame is reserved for less than 6cm, which is to make the curtain rod have a place to make the curtain cloth completely cover the window. When the curtain cloth covers the entire wall, the length of the Roman rod (excluding the decorative head at both ends) is about 18-22 cm shorter than the indoor width. After the installation, the decorative head of the Roman rod has a gap of about 2— 6cm, the so-called "remaining place"
When we install the curtain rods, what we need to know is how to do it, and learning these is very helpful for our life! The above is the installation method and installation points of the curtain rods introduced by Xiaobian today. For more information, please stay tuned to the renovation home.
More related wonderful reading:
Telescopic curtain rod how to retract the curtain rod installation method
How to install the curtain rod? Curtain rod installation precautions
What are the curtain installation methods? Curtain rod installation precautions
Curtain rod installation method, after reading your own curtain
Curtain rod installation method and installation precautions
Child cupboard locks are not only a child locks for cupboard, but also a guarantee of safe life for your children. Nothing could be better than securely locked without damage to your furnitures. Instead of a clamp or a fastener, these cupboard locks use an adjusting strap to keep doors closed. Installing the Child Safety Lock is quick and easy with requiring no tools or drilling. Just peel the backing off to reveal the 3M adhesive and press the cupboard locks onto the front of the door and the side of the cupboard or appliance.
Reliable Child Cupboard Lock,Adjustable Child Cupboard Lock,Strong Adhesive Child Cupboard Lock,Hidden Child Cupboard Lock
Ningbo Fabe Child Safety Co., Ltd. , https://www.fabesafe.com