With the support of science and technology and economy, the development of syringe pump is more in line with the practical application. The syringe pump has the advantages of uniform movement at full speed, high control accuracy, precise flow rate, good flexibility and no need of cleaning. Although the advantages of a lot of injection pump, but in practical applications, there will be unexpected situations occur, when a failure, the workers should be how to deal with it? Next, we will analyze the solution of the syringe pump fault. Syringe Pump Troubleshooting Solution 1: Alarm Indicator Blinking Solution: 1. Press [STOP] to cancel the buzzer sound. 2, close the intravenous injection pipeline. 3, to solve the cause of congestion. 4, open the intravenous injection line, press the [START] key to restart the injection. Two: flashing alarm indicator Solution: 1, press the [STOP] key to eliminate the buzzer sound. 2, replace the syringe, continue infusion. 3, take corrective measures, the alarm light continued flashing, please contact your local sales. Three: light flashes, battery alarm solution: 1, press [STOP] key to eliminate buzzer sound. 2, the pump into the AC or DC power supply as soon as possible. Each of these devices may experience problems more or less during use. These problems may sometimes be insignificant, but sometimes they can cause great harm to users, especially in some sensitive areas. If the device is in use Failure to use may not only affect the performance of the equipment, but also affect the safety of life. Therefore, these sensitive equipment failures need to be taken more seriously.
Strain Gauges,Accuracy Load Cell,Parallel Grid Strain Gauge,Pressure Sensor Use Gauges
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcells.com