Chain-type mesh belt is one of the most widely used types of mesh belts. Its structure is simple and its use cost is low. It is favored by many users. What is the difference between chain-type mesh belt and ordinary network? The chain type stainless steel mesh belt is to install a chain on the stainless steel mesh belt, and the mesh belt and the chain are linked together through the support shaft, and the drum transmission mode of the traditional mesh belt is changed, which is a chain type transmission. Also known as stainless steel mesh chain. Compared to traditional stainless steel mesh belts, chain stainless steel mesh belts have the following advantages: 1 : Smooth operation, after changing the mesh belt to chain drive, the chain and the mesh belt are accurately positioned by the transmission sprocket, and the precise chain pitch ensures the absolute synchronization of the chain running on both sides of the mesh belt, thereby Completely solved the problem of the deviation of the belt belt running. 　　 2 : Strong tensile strength The traditional mesh belt relies on the rollers on both sides to tighten the mesh belt as much as possible to ensure the operation of the mesh belt, which makes the mesh belt bear the gravity of the material to be conveyed, and also bears the huge pulling force of the equipment itself, so the mesh belt is easily deformed. Damaged, and the chain type stainless steel mesh belt distributes the tension of the equipment to the chain and the support shaft, so that the mesh belt can only operate under the gravity of the material to be conveyed, thereby greatly increasing the life of the mesh belt. 　　 3 : Long service life Because the chain belt has many advantages, these advantages can effectively reduce the damage caused by the wear and accident of the belt itself. Therefore, the chain type mesh belt has a particularly long service life, which can be several times higher than that of the ordinary drum transmission type mesh belt. 　　 Disadvantages of the chain type stainless steel mesh belt: Because the chain and the support shaft are added to the mesh belt, the cost of the mesh belt is increased, and the production cost is higher than that of the drum-driven mesh belt, so the price will be higher than the conventional net of the same specification. Belt height. News source: http://
It is no doubt that the sharpness is very important for knives as well as service life. Being compared with other knives, these kinds of knives are extremely sharp , expecially laser cladding Knife included Chef Knife, Japanese Knife and so on. The extremely sharp knife can maintain 100% original taste and flavor of food.They try hard not to destroy the cutting structure of food tissue cells. In addition, laser cladding is an indispensable high-end manufacturing technology in aerospace, vehicle manufacturing,petroleum exploration,military industry and nuclear power. The powder steel alloy welding in blade with laser cladding technology can greatly improve the sharpness of knives,abrasion resistance,heat resistance,corrosion resistance and so on. The most important is, the service life of laser cladding knife is much longer than other knives.
Except laser cladding technology, some blade of knife are made of 7CR17MOV and Damascus laminated steel material. These material are also have many advantages such as excellent sharpness and high hardness. When you are cutting the food with this knife, it was like a burning red iron sheet cutting the cheese, the pleasant sensation gives you the happiness you ever had.
Kitchen Knives,Kitchen Chopping Knife,Sharp Kitchen Knives,Stainless Steel Knife
YANGJIANG TRI-WIN INDUSTRY & TRADE CO.,LTD , http://www.triwintableware.com