The energy-saving ball mill changes the structure of the original ball mill, so that the body and the chassis are integrated. It can be placed on the foundation plane at one time during installation. The main bearing adopts double-row self-aligning tweezers to reduce energy consumption by 30% and improve fine particle size. The processing energy is increased by 15-20%. Magnetic steel slag is a kind of magnetic slag structure, which can be ground and crushed by conventional beneficiation process, and then magnetic separation can achieve the purpose of recycling. Stainless steel slag is a kind of mineral without magnetism and shaped like magnetic steel slag. Since stainless steel slag does not contain magnetism and gravity is heavier than the material of stainless steel slag, it can be used by gravity beneficiation equipment. After grinding and pulverizing, re-election equipment is used. Reach the purpose of recycling. For magnetic steel slag and stainless steel slag beneficiation equipment, both have the characteristics of small investment, low recycling cost, energy saving and environmental protection, high efficiency and high return rate.
The process of magnetic steel slag beneficiation is that the large steel slag is crushed by the jaw crusher, and the steel slag is dry-selected and run by the dry selection roller, so that the magnetic separation efficiency and taste can be improved, and the dry-selected steel slag enters the steel slag ball mill for grinding and pulverization. Finally, the steel slag concentrate is selected by the magnetic separator. If there are more iron tumors in the steel slag after dry selection, the iron tumor can be selected first by the re-selecting shaker, and the remaining part is then subjected to grinding and magnetic separation by the ball mill.
The stainless steel slag beneficiation process is that the large stainless steel slag is crushed by a jaw crusher, and then ground and pulverized by a stainless steel slag ball mill. After grinding and pulverizing the stainless steel slag particles, washing with a re-selecting shaker and a spiral chute can be performed. Achieving good recycling results, in the case of stainless steel slag beneficiation, the use of the shaker is more efficient and wider.
Http://news.chinawj.com.cn
Submission:
Wire mesh filter cloth mainly refers to wire mesh products made with Dutch woven patterns. Anping Yahua Wire Mesh Co. is an expert in Woven Wire Mesh, especially custom and special type wire mesh filter cloth Dutch woven. Dutch Woven Wire Cloth can be further divided into mainly four types according to weaving patterns:
Wire Mesh Filter Cloth Dutch Plain Woven
Wire Mesh Filter Cloth Dutch Twill Woven
Wire Mesh Filter Cloth Reverse Dutch Woven
Wire Mesh Filter Cloth Five-Heddle Woven
Dutch Weave Mesh, Woven Wire Mesh, Twill Dutch Weave Wire Manufacturer in China
Anping Shengjia Hardware Mesh Co.,LTD , http://www.oilshaleshakerscreen.com