Radiator has always been one of the home heating equipment, but the radiator also has its own advantages and disadvantages. With the upgrading of the radiator, there are many material radiators, the following Xiaobian to everyone to understand the advantages and disadvantages of the aluminum alloy radiator :
Aluminum alloy radiator advantages and disadvantages:
Aluminum alloy radiator advantages:
More plasticity, cheaper prices. Good thermal conductivity, fast heat dissipation, low density, light weight, easy production, no pollution, convenient handling and installation, most suitable for independent heating.
Aluminum alloy radiator defects:
Aluminum alloy radiator is most afraid of alkaline water corrosion, fear of oxidation, which is due to its metal due to the need for full water maintenance, both inside and outside the need to spray, poor environmental performance, heating the surface coating will release the formaldehyde will cause the human body Certain damage, whether it is made of organic or inorganic anti-corrosion coating, anti-corrosion effect is not great. Can not be mixed with other systems to prevent electrochemical corrosion. Not suitable for central heating systems. Because most of the heating systems used in the past used cast iron heating, heating water in the circulation process, will wash away a lot of slag on the inner wall of the cast iron pipe, they will adhere with the circulating water on the aluminum heating liner on the anti-corrosion layer, thereby shortening The service life, so should avoid the aluminum alloy radiator and other materials mixed installation.
Aluminum alloy radiators are known for their efficient heating, and nowadays household heating radiators have more materials, but it needs to be replaced once in several years. The relatively high prices are also its disadvantages.
Information on aluminum alloy radiators was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Copper Radiator Aluminum Alloy Sliding Door Locks Copper and Aluminum Radiators Ten Radiators Aluminum Alloy Profiles
Pipe ftiings have a lot of kinds ,such as elbow, Tee, flanges, heads, cap, Cross,Forged Fitting ,Reducer ,Bend, etc, made of carbon steel, stainless steel, alloy steel and other special metal materials as required by its customers.
According to the connection method can be divided into the fitting socket type, curve play double weld pipe, threaded pipe fittings, Flange pipe fittings and welding pipe fittings.Use the same as the pipe materials.Elbow (elbow), flange, tee, four-way tube (cross) and reducer (reducer), etc.Turn Angle for pipeline;Flange is used to make the pipe with pipe connecting parts, connection pipe, tee to the meeting-place of three tube;Cross pipe used in the meeting-place of four tube;Reducer is used for different pipe diameter of two pipes connected.
Stainless Steel Pipe Fittings,Seamless Stainless Steel Pipe Fittings,316 Stainless Steel Pipe,Stainless Steel Fittings
Shijiazhuang Huize Pipe Fitting Co., Ltd. , https://www.huizegd.com