Careful driving to the ship of the year, in today's society is increasingly promoting safe production, more people began to pay attention to the awareness of safe production at work.
In the stone care industry, it is no exception. It is also necessary for stone care practitioners to have basic safety construction knowledge to ensure safe operation. Here, Guangdong Changli Stone Care summarizes the safety issues that may be involved in the stone care industry:
First, electricity safety
1. Every time you enter the construction site to start construction, you should check the power-on condition of the electrical equipment, the opening condition of the distribution box and equipment switch.
2. Whether the cable is unobstructed, whether it is soaked or broken.
3, stone renovation, stone care construction process should pay attention to the equipment connection line at any time, do not twist the wire into the grinding machine site, if the wire is twisted into the grinding machine site will break the wire, causing leakage.
4. The daily construction should be retracted before leaving work, and the unit should be kept in a safe place. The construction site should be prevented from being lost. After the construction is completed, the machine power switch should be turned off, then the power plug should be unplugged, and finally the total power supply in the main distribution box should be turned off.
Second, water safety
1. The construction of the site confirms that the water source can be used for construction. The room with wooden floors should be very careful. Do not sprinkle water on the wooden floor to avoid foaming damage. If it has been immersed in water, it should be sucked and dried in time.
2, stone renovation, stone care polishing process should pay attention to the sewage generated during the grinding should be absorbed in time with a water suction machine, so as not to wet the wooden floor line or wall cabinet.
3. The construction site shall confirm the construction sewage discharge point. It is not allowed to directly pour the sewage with sediment into the sewer. If the sediment is too much, the drainage port will be blocked. The sediment-free sewage should be dumped in the spare bucket for 10 minutes. Left and right, the sewage with a small amount of sediment can be discharged to the sewage pipe with a relatively large diameter, and finally the sediment is separately poured into another spare bucket.
4. The daily water discharge switch should be turned off before the construction is completed every day to check whether the water valve on the site is closed. Clean up the water on the site to avoid leakage of the floor due to excessive water.
Third, the construction process protection
1. Stone care will use some chemical agents when dealing with stone staining lesions. Some of them have strong acid and alkalinity. Wear rubber gloves in this kind of operation to avoid direct contact with the skin.
2. Some pharmaceuticals are flammable or flammable, so smoking and other sources of ignition should be strictly prohibited at such construction sites.
3. Wear protective glasses when cutting seams to prevent sand and stones from splashing into the eyes.
4. In the process of stone renovation and stone care, irrelevant personnel are strictly prohibited from using the construction equipment, tools and chemicals to avoid accidents caused by improper operation.
5. Some of the machinery and equipment required for stone renovation and stone care are heavier. Care should be taken during handling. In particular, you should pay attention to the foot when going up and down the stairs. At the same time, you should also prevent the elevator from being scraped when entering and leaving the elevator. And walls.
6, the construction tools should not be placed indiscriminately, find a suitable place to be placed in a unified manner, easy to access.
7. Do a good job of construction protection before entering the site. Pay attention to the protection of the owner's home during the construction process to prevent accidental damage during the construction process.
Aluminium Strip,3003 Aluminum Strips,Aluminium Strip For Piping,Aluminum Strips With Narrow Width
Zhengzhou Yearshine Industry Co., Ltd , https://www.zzyscorp.com